AMD Mobile Athlon™ II Neo/Turion™ II Neo Mini ITX with VGA/LVDS/HDMI/DVI, AIMB-222 4 COM and Dual LAN NEW Features ƒ Supports AMD Mobile Athlon™ II Neo/AMD Turion™ II Neo ASB2 BGA processors ƒ Two 204-pin SODIMM up to 4 GB DDR3 1066 MHz SDRAM ƒ Supports VGA/LVDS/HDMI, DVI is optional ƒ Dual LANs, 4COM, Mini PCIe, and CFast ƒ Supports embedded software APIs and Utilities Software APIs: SMBus H/W Monitor Watchdog GPIO Brightness Utilities: BIOS flash eSOS Monitoring Embedded Flash Lock Security ID Note: eSOS requires ODM BIOS, available by request Specifications CPU AMD Turion II Neo AMD Turion II Neo AMD Athlon II Neo Max. Speed 2.2 GHz (dual-core 25W TDP) 1.5 GHz (Dual-Core 15W TDP) 1.7 GHz (Single-Core 12W TDP) Processor System L2 Cache 2 MB Chipset AMD 785E + SB820 BIOS AMI 16 Mbit SPI PCI - Expansion Slot Mini-PCIe 1 PCIe PCIe x8 (PCIe gen 2) Technology Dual channels DDR3 1066 MHz SDRAM Memory Max. Capacity 4 GB Socket 2 x 204-pin SODIMM Controller ATI Radeon™ HD4200 serial, supports OpenGL 2.0, DirectX10, H.264, VC1 VRAM Side port memory 128 MB (Optional) VGA Supports up to 2560 x 1536 @ 32bpp Graphics LVDS Supports 24-bit dual channel and up to 1920 x 1200 DVI (optional) 1920 x 1200 @ 60 MHz HDMI 1920 x 1200 @ 60 MHz Dual Display Supports dual display of any two display device (CRT, LVDS, HDMI, DVI) Interface 10/100/1000 Mbps Ethernet Controller GbE LAN1: RTL8111DL; GbE LAN2: RTL8111DL Connector RJ-45 x 2 Max Data Transfer Rate 300 MB/s SATA Channel 2 Mode None EIDE Channel None SSD Cfast compactFlash Cfast type I/II VGA 1 DVI 1 Ethernet 2 Rear I/O USB 4 Audio 3 (Mic-in, Line-out, Line-in) Serial 2 (RS-232) LVDS & Inverter 1 DVI 1 (optional) USB 4 (USB 2.0 compliant) Serial 2 (RS-232, 5V/12V by jumper selection) Internal Connector IDE None SATA 2 Cfast compactFlash 1 Parallel None GPIO 8-bit Output System reset Watchdog Timer Interval Programmable 1 ~ 255 sec/min Power On AMD Turion II Neo Dual Core Processor, 4GB DDR3 DIMM Power Requirement +5 V + 3.3 V +12 V +5 VSB 2.88 A 0.89 A 1.79 A 0.09 A Operating Non-Operating Environment Temperature 0 ~ 60° C (32 ~ 140° F) -40 ~ 85° C (-40 ~ 185° F) Physical Characteristics Dimensions 170 mm x 170 mm (6.69" x 6.69") Industrial Motherboards All product specifications are subject to change without notice Last updated : 9-May-2011 USB 2.0/1.1 AIMB-222 AMD Athlon™ II Neo/ Board Diagram Turion™ II Neo CRT VGA Channel A DDR3 1066 48-bit LVDS Channel B LVDS DDR3 1066 AMD 785E PCIe x1 HDMI 48-bit LVDS GbE LAN1: RTL8111DL PCIe x1 48-bit LVDS GbE LAN2: RTL8111DL 2nd DVI (option) PCIe x8 PCIe x1 PCIe x16 slot Mini-PCIe Cfast Type I/II 300MB/s 2 SATA ports 300 MB/s SB820 8 USB Ports Realtek Audio Codec HD Audio ALC892 LPC SPI Super IO Winbond BIOS Fintek F81216D W83627DHG-P 2 RS-232 PS/2, WDT, 8-bit GPIO, 2 COM Ordering Information Optional Accessories Part Number CPU Display LAN COM Part Number Description AIMB-222G2-S0A1E 1.7 GHz CRT/LVDS/HDMI 2 4 1700003195 USB cable with two ports, 17.5 cm AIMB-222G2-S1A1E 1.5 GHz CRT/LVDS/HDMI 2 4 1700002204 USB cable with two ports, 27 cm AIMB-222G2-S2A1E 2.2 GHz CRT/LVDS/HDMI/DVI 2 4 1700008461 USB cable with four ports, 30.5 cm Packing List Embedded OS/API Description Quantity OS/API Description AIMB-222 SBC 1 Win XPE XPE WES 2009 SATA HDD cable 2 Software API SUSI V3.0 Serial port cable 2 CPU cooler 1 I/O port bracket 1 Startup manual 1 Driver CD 1 I/O View AIMB-222G2-S0A1E AIMB-222G2-S1A1E AIMB-222G2-S2A1E Online Download www.advantech.com/products Direct Media Interface 20-Gbit/s HT3/HT1 bandwidth Value-Added Software Services Software API: An interface that defines the ways by which an application program may request services from libraries and/or operating systems. Provides not only the underlying drivers required but also a rich set of user-friendly, intelligent and integrated interfaces, which speeds development, enhances security and offers add-on value for Advantech platforms. It plays the role of catalyst between developer and solution, and makes Advantech embedded platforms easier and simpler to adopt and operate with customer applications. Software APIs Control Monitor General Purpose Input/Output is a flexible parallel interface A watchdog timer (WDT) is a device that performs a specific that allows a variety of custom connections. It allows users operation after a certain period of time if something goes wrong to monitor the level of signal input or set the output status to and the system does not recover on its own. switch on/off a device. Our API also provides Programmable A watchdog timer can be programmed to perform a warm boot GPIO, which allows developers to dynamically set the GPIO (restarting the system) after a certain number of seconds. GPIO Watchdog input or output status. ® SMBus is the System Management Bus defined by Intel Corporation in 1995. It is used in personal computers and servers for low-speed system management communications. The Hardware Monitor (HWM) API is a system health The SMBus API allows a developer to interface a embedded supervision API that inspects certain condition indexes, such as system environment and transfer serial messages using the fan speed, temperature and voltage. Hardware SMBus protocols, allowing multiple simultaneous device SMBus Monitor control. 2 I C is a bi-directional two wire bus that was developed by Philips for use in their televisions in the 1980s. The Hardware Control API allows developers to set the PWM 2 The I C API allows a developer to interface with an embedded (Pulse Width Modulation) value to adjust fan speed or other 2 system environment and transfer serial messages using the I C devices; it can also be used to adjust the LCD brightness. Hardware 2 protocols, allowing multiple simultaneous device control. I C Control Display Power Saving Make use of Intel SpeedStep technology to reduce power power The Brightness Control API allows a developer to interface with consumption. The system will automatically adjust the CPU an embedded device to easily control brightness. Speed depending on system loading. Brightness CPU Speed Control Refers to a series of methods for reducing power consumption in The Backlight API allows a developer to control the backlight computers by lowering the clock frequency. These APIs allow the (screen) on/off in an embedded device. user to lower the clock from 87.5% to 12.5%. System Backlight Throttling Software Utilities The BIOS Flash utility allows customers to update the flash The eSOS is a small OS stored in BIOS ROM. It will boot up in ROM BIOS version, or use it to back up current BIOS by case of a main OS crash. It will diagnose the hardware status, copying it from the flash chip to a file on customers’ disk. The and then send an e-mail to a designated administrator. The BIOS Flash utility also provides a command line version and eSOS also provides remote connection: Telnet server and FTP API for fast implementation into customized applications. server, allowing the administrator to rescue the system. BIOS Flash eSOS The embedded application is the most important property of Flash Lock is a mechanism that binds the board and CF card a system integrator. It contains valuable intellectual property, (SQFlash) together. The user can “Lock” SQFlash via the Flash design knowledge and innovation, but it is easily copied! The Lock function and “Unlock” it via BIOS while booting. A locked Embedded Security ID utility provides reliable security functions SQFlash cannot be read by any card reader or boot from other for customers to secure their application data within embedded platforms without a BIOS with the “Unlock” feature. Embedded Flash Lock BIOS. Security ID The Monitoring utility allows the customer to monitor system health, including voltage, CPU and system temperature and fan speed. These items are important to a device; if critical errors happen and are not solved immediately, permanent damage may be caused. Monitoring All product specifications are subject to change without notice Last updated : 9-May-2011