ADVANTECH MIC-3082A-AD

® 12U CompactPCI Enclosure with 20-slot 6U Backplane and Redundant Power Supply MIC-3082A (CT Bus and Rear I/O) NEW Features § 12U-high enclosure for 6U CompactPCI boards § 20-slots 6U CompactPCI backplane-18 node slots/2 fabric slots § Multiple backplane configuration available for various applications (1/2/4 segments) Modularized, front-accessible, and hot-swappable fan, power supply, and server board. All front-accessible form factors of sever blades, power modules, and a fan module § Supports packet switch backplane specification (PICMG 2.16) § Supports computer telephony specification (PICMG 2.5) § 1120 W + 1+1 hot-swappable load-sharing AC/DC power supplies § Six hot-swappable fans and blower § Build in intelligent chassis management module, optional backplane combination (MIC-3924B-A) § Design for NEBS level 3 and ETSI installations, independent alarm and management module § One serial port for emergency dialing out through modem Introduction The MIC-3082A 12U general purpose multi-segment packet switched platform is an extremely flexible, high-availability platform, configurable for both compute-intensive and I/O-intensive applications. It is one of several telecom building blocks from Intel, built on the PICMG* 2.16 specification, providing OEM equipment designers with carrier-grade, standards-based solutions. This high-capacity CompactPCI platform features innovative power and cooling. In addition to its high availability features, the MIC-3082A platform is highly modular, scalable, and extremely serviceable. It is designed to inter operate with Advantech high-performance CPU boards and packet switched backplane products, and with third-party boards meeting PICMG 2.16 specifications. Flexible Backplane Configurations The backplane is flexible and can accommodate multiple configurations suitable to your applications. Blade servers - Supports up to 18 independent servers communicating over the PICMG 2.16-compliant Ethernet backplane (slots 2-19) with dual switch blades. Single system - One PCI segment with total 18 slots available for your application with optional switch capability. Dual system - Two independent PCI segments which allow two independent systems Quad system - Four independent PCI segments which allow multiple systems in one chassis. The MIC-3082A has a 64-bit PCI-to-PCI bridge module to extend the number of I/O slots. All slots support IEEE 1101.11, with 80mm-deep transition cards in the rear-panel I/O section, directly behind the backplane. Each node and fabric slot may be independently configured for 3.3V or 5V I/O operation. System block diagram is shown as Figure 1. Chassis Management Module The MIC-3082A includes one Advantech chassis management module (CMM), MIC-3924B, is an 95 x 100 mm removable module that installs and operates in the back of chassis. The MIC-3924B is the central management component for all Advantech PICMG 2.16-compliant processor boards. Redundant Power Subsystems The MIC-3082A platform supports a redundant, scalable power solution, accommodating up to eight power supplies, divided into two separate power subsystems. Each power subsystem supports N+N redundant power supplies and receives input power from redundant DC or AC inputs. (see Figure 2). Cooling Architecture With 1120 W power supplies, the MIC-3082A platform provides more than 56 W per slot or can house three hot-swappable fan and blower trays, serviceable from the front. The top blower cools the front card cage area, and the middle fan cools the power supplies, sucking cool air into the card cage. The two rear fans complete the cooling. All fans are in a N+1 redundant cooling architecture. (see Figure 3). Online Download www.advantech.com/products Advantech may make changes to specifications and product descriptions at any time, without notice. Last Updated: April-02-04 PSU8 PSU7 PSU6 PSU5 PSU4 PSU3 PSU2 PSU1 MIC-3082A Fan Fan Fan & Blower & Blower & Blower Features Power Domain Slots 1 through 20: Switch A & B (PCI Segments 1 & 2 & 3 & 4) Power System A Power System B Power Power Source B Source A 2 Redundant N+N Power Subsystem s Figure-1: Component Layout of MIC-3082A Figure-2: MIC-3082A Power Architecture 20-slots backplane -18 node slots/ 2 fabric slots 1120 W 1+1 hot-swappable Figure-3: MIC-3082A Side view for air-flow load-sharing AC/DC power supplies Supports IEEE hot-swappable 1101.11 real I/O fans and blowers transition boards Intelligent alarm module, detecting system power, fan speed and CPU temperature Online Download www.advantech.com/products Advantech may make changes to specifications and product descriptions at any time, without notice. Last Updated: April-02-04 Specifications 6U CompactPCI x18, transition x18 (80 mm, IEEE1101.11 compatible) support single board Node Slot computer or peripherals Fabric Slot 6U redundant PICMG 2.9 10/100/1000 Ethernet Fabric x2 Backplane Bus Four 32/64-bit, 33/66 MHz PCI bus DimensionVI/O Voltage + 3.3 V/+ 5 V Controller Intel DEC21154 Bridge module Bus 32/64-bit, 33/66 MHz VI/O Voltage + 3.3 V/+ 5 V (selectable) Fan 3 (151 CFM) in the middle of middle of chassis (inlet) Cooling Blower 3 (40 CFM) on the chassis top (outlet) AC 100 ~ 240 V @ 47 ~ 63 Hz, full range Input DC - 48 V (- 38 ~ - 72 V input range) Output 1120 W 1+1 redundant AC and DC (w/PFC and dual inputs) AC (4 Modules) +3.3 V* +5 V* -5 V +12 V -12 V +5 Vsb Power Requirement Max. Load 58 A 86 A 2 A 30 A 2 A 3 A Min. Load 0.3 A 2.0 A 0.0 A 0.5 A 0.0 A 0.0 A DC (4 Modules) +3.3 V* +5 V* -5 V +12 V -12 V +5 Vsb Max. Load 58 A 86 A 2 A 30 A 2 A 3 A Min. Load 0.3 A 2.0 A 0.0 A 0.5 A 0.0 A 0.0 A Operating Non-Operating Temperature 0 ~ 45 °C (32 ~ 113 °F) -20 ~ 60 °C (-4 ~ 140 °F) Environment Humidity 20 ~ 90 % @ 40 °C, non-condensing 10 ~ 95 % @ 40 °C, non-condensing Shock 10 G 30 G Vibration (5-500 Hz) 1.0 Grms 2.0 Grms Dimensions (W x H x D) 440 x 533 x 431 mm (17.3" x 21" x 17") Physical Weight 40 Kg (88.1 lb) Backplane Fan module Power supply Reliability MTBF 800,000 hours 50,000 hours @ 25 °C 100,000 hours @ 70% load Serviceability MTTR 5 minutes PICMG 2.0 R3.0 CompactPCI Core Specification PICMG 2.1 R2.0 CompactPCI Hot-Swap Specification Standard PICMG 2.5 R1.0 CompactPCI Computer Telephony Specification Compliance PICMG 2.9 R1.0 CompactPCI System Management Specification PICMG 2.16 R1.0 CompactPCI Packet Switching Backplane Specification EMI/Safety CE, TUV, UL,FCC * Maximum output 520 W for +5 V and +3.3 V for either four AC or DC Recommended Configurations Flexible Backplane Configurations Enclosure CPU Board Rear I/O Board Number of PCI segment Bridge boards Setting MIC-3369A-Mx RIO-3309C-A 1 3 Figure 1 MIC-3082A MIC-3358A-Mx RIO-3309C-A 2 2 Figure 2 MIC-3368E-A MIC-3308C-A 4 0 Figure 3 PS: see detailed setting in manual Ordering Information Part Number Power Distribution PSU P/N 4 AC: 1757984010 MIC-3082A-AD 1120 W AC+DC 4 DC: 1757984011 MIC-3082A-AA 1120 W AC + AC 4 AC: 1757984010 MIC-3082A-DD 1120 W DC+DC 4 DC: 1757984011 Online Download www.advantech.com/products Advantech may make changes to specifications and product descriptions at any time, without notice. Last Updated: March-03-04 Figure 1 Figure 2 Figure 3 Online Download www.advantech.com/products Advantech may make changes to specifications and product descriptions at any time, without notice. Last Updated: March-03-04