® ® ® 6U CompactPCI Intel Pentium 4 Processor-M Board with VGA/Dual Gigabit ® MIC-3358A LAN/PMC (PICMG 2.16) NEW Features ® ®  Supports Intel Pentium 4 Processor-M up to 2.5 GHz  Dual Gigabit Ethernet on board  Up to 2 GB (DDR-266) memory on board with ECC ®  Intel 845E chipset  One 32-bit/33 MHz PMC expansion slot ®  PICMG 2.16 compliant with Packet Switching Backplane Specification  Hot-Swap Specification compliant (PICMG 2.1)  On-board 2.5" HDD connector and CompactFlash socket • System/Drone mode selectable Introduction ® ® The MIC-3358A is a high-performance Intel Pentium 4 Processor-M based CompactPCI server blade, fully compliant with the PICMG 2.16 Packet Switched Backplane specification. It provides a cost effective platform for applications which demand lower power and high performance. The MIC-3358A can be used in either a system slot or peripheral slot, making it an ideal choice for emerging applications requiring fast switched-fabric interconnection between blades. It is also designed in compliance with the PICMG 2.9 specification to cooperate with remote system and platform management modules. With these features and full hot swap functionality, the MIC-3358A is well-suited for mission critical telecom and data communication applications where high availability is essential, such as 3G wireless infrastructure, Voice-over-IP, media gateways, soft switches and triple-play server clusters. The MIC-3358A is architected around the Intel Pentium 4 Processor-M and the Intel 845E chipset. It excels as a high performance CompactPCI platform, delivering compelling system bus performance across a 400 MHz Intel NetBurst. microarchitecture. Its innovative wider data paths and flexible memory refresh technology maximize DDR SDRAM performance. In addition to its full array of industry standard I/O features, the MIC-3358A also provides dual Gigabit Ethernet ports and one PMC site for on-board I/O expansion. The MIC-3358A sin� Specifications ® ® CPU (CPU not included) Intel Pentium 4 Processor-M Max. Speed 2.5 GHz (400 MHz FSB) Processor System L2 Cache 512 KB on die ® Chipset Intel 845E + ICH4 BIOS Award 4 Mbit Flash (Network booting/Console Redirect optional) Front Side Bus 400 MHz Bus PCI 32-bit/33 MHz Technology DDR-200/266 SDRAM with ECC support Memory Max. Capacity 2 GB Integrated 512 MB/1 GB/2 GB memory on board (No onboard SO-DIMM connector for upgradility) Controller ATI RageXL Graphic VRAM 8 MB on board Interface 10/100/1000Base-TX Gigabit Ethernet ® Ethernet Controller Intel 82540 x2 I/O Connector RJ-45 x1 (Front) Mode ATA 33/66/100 mode EIDE Channel 2 Storage Site One IDE connector and space reserved for embedded 2.5" HDD Interface System/Drone mode capability PCI-to-PCI Bridge Controller HiNT HB6 System Bus Up to 64-bit/33 MHz LAN 1 Front I/O Interface Serial 1 (RS-232, RJ-45 connector) Operating System Compatibility Windows 2000/NT 4.0/XP, Red Hat Linux 8.0 and 9.0, VxWorks Controller Winbond W83782D Hardware Monitor Monitor CPU temperature, 3.3 V/5 V/12 V Output Interrupt, system reset, NMI Watchdog Timer Interval Programmable, 0~255 sec. Site 1 PMC Interface 32-bit/33 MHz PCI Mezzanine (IEEE1386.1) Signal +5 V/+3.3 V compliant 7-10 MIC-3358A Industrial Motherboards 1 Specifications Cont. Solid State Disk 1 CompactFlash socket LEDs HDD, power, hot swap Industrial Miscellaneous Motherboard USB (2.0) 2 channels Chassis 2 Real Time Clock Built-in the South Bridge Voltage +3.3 V +5 V +12 V -12 V Power Requirement PICMG (Intel Pentium 4 M 1.7GHz) Maximum 4.43 A 4.9 A 35 mA <25 mA Single Operating Non-Operating Board 3 Temperature 0 ~ 55° C (32 ~ 131° F) -40 ~ 70 °C (-40 ~ 158 °F) Computers Environment Humidity - 95% @ 60°C (non-condensing) Shock 20 G 50 G Industrial Vibration (5-500 Hz) 1.5 Grms 2.0 Grms Computer Chassis Dimensions 233.35 x 160 mm (9.19" x 6.3"), 1-slot width 4 Physical Characteristics Weight 0.8 kg (1.76 lb) PICMG 2.0, R3.0 CompactPCI Specification Industrial Compliance Standard PICMG 2.1, R2.0 Hot-Swap Specification Computer PICMG 2.16, R1.0 Packet Switching Backplane Specification Peripherals 5 Recommended Configurations 6U CompactPCI CPU Board PMC Module Rear I/O Board Enclosure Enclosures 6 RIO-3309C-A MIC-3036-A/S2, MIC-3039-B, MIC-3056A, MIC-3038A/C, MIC-3358A MIC-3665-A, MIC-3665-B RIO-3309S-A1 MIC-3041A/B/C/CW/L, MIC-3042A/B, MIC-3081A/B*, MIC-3082A, CP-150 RIO-3309S-A2 6U CompactPCI * MIC-3081A doesn’t support RIO-3309S-Ax Boards 7 Rear Transition Board 6U CompactPCI Rear Panel On-board Header / Socket / Connector I/O 8 Part Number Slot Width KB & Mouse COM2* GbE LAN VGA USB 10/100 LAN** SCSI IDE FDD SCSI COM1 PRT USB Conn. RIO-3309C-A 1 1 2 1 1 1 - 1 1 - 1 1 1 J3/J5 1 J1/J2/ 6U RIO-3309S-A1 1 1 2 1 1 1 - 1 1 1 1 1 1 1 CompactPCI J3/J5 Accessories 9 J1/J2/ RIO-3309S-A2 1 1 2 1 1 1 1 1 1 - 1 1 1 1 J3/J5 3U * Supports RS-232/422/485 selectable CompactPCI ** Optional for 3rd LAN from MIC-3358 but occupies the I/O port for COM2. Systems 10 Ordering Information Internet Security Front Panel I/O On-board Main Features Platforms Part Number 11 LAN COM PMC USB VGA CPU Memory EIDE Channel CF Socket Slot Width MIC-3358A-M0 * 1 1 1 2 1 - 512 MB 2.5" HDD 1 1 Network MIC-3358A-M1 * 1 1 1 2 1 - 1 GB 2.5" HDD 1 1 Application MIC-3358A-M2 ** 1 1 1 2 1 - 2 GB 2.5" HDD 1 1 Ready 12 Platforms * Please order RIO module (refer to above table) with MIC-3358 for rear I/O access. ** Please contact your local distributor for MIC-3358A-M2 availability. *** The above part numbers do not include the CPU, please order separately. MIC-3358A MIC-3358A One PMC knockout One DB-15 VGA port Two USB 2.0 ports One RJ-45 COM1 port One RJ-45 Gigabit LAN port One u-FCPGA One 32-bit/33 MHz One 2.5" HDD bay One passive CompactFlash socket PMC connector CPU heatsink Memory on board One 2.5" IDE socket socket Online Download www.advantech.com/products 7-11