® ® 6U CompactPCI Low Power Pentium III Processor Board with VGA/Dual LAN/PMC/ MIC-3368 Embedded HDD Features ® ®  Low power Intel Pentium III 700 MHz (BGA2) processor built in  Intel 440GX chipset ®  PICMG 2.16 compliant with Packet Switching Backplane Specification  Full Hot-Swap Specification compliance (PICMG 2.1, R2.0)  Up to 1 GB ECC SO-DIMM SDRAM memory  One 32-bit PMC expansion site  Dual Fast 10/100 Mbps Ethernet on board with rear I/O  Embedded 2.5" HDD or optional CompactFlash Introduction The MIC-3368 series CompactPCI low power CPU board is an ultra-high density design built around a cost effective Intel Pentium III processor and with upgradeable SODIMM expansion to� With fully integrated features, the MIC-3368 can be used as a powerful system master CPU board or as a server blade connected to a PICMG 2.16 Packet Switched Backplane for switched-fabric communication between blades. The MIC-3368 was designed with a maximum power requirement of 25 Watts for applications with airflow or cooling constraints. With all these features and inherent hot swap functionality, the MIC-3368 is perfectly matched for mission critical telecom and data communication applications where high availability is essential, such as 3G wireless infrastructure, Voice-over-IP, media gateways, softswitches and triple-play server clusters. Specifications MIC-3368B MIC-3368C MIC-3368E MIC-3368E1 CPU Intel Pentium III low power Max. Speed 700 MHz (100 MHz FSB) 1 GHz (133 MHz FSB) Processor System L2 Cache 256 KB Chipset Intel 440BX Intel 440GX Intel 440GX Intel 440GX BIOS Award 2 Mbit Flash (network booting optional) Front Side Bus 66/100 MHz Bus PCI 32-bit/33 MHz SCSI Controller Support - - Rear I/O Rear I/O Technology PC-100 SDRAM with ECC support Memory Max. Capacity 512 MB 1 GB 1 GB 1 GB Socket 144-pin SO-DIMM x2 Controller 69030 Graphic VRAM 4 MB SDRAM Interface 10/100Base-TX Ethernet Controller Intel 82559 x2 Connector RJ-45 x1 Mode ATA 33 EIDE Channel 2 (Max. 4 devices) Connector One IDE connector for embedded 2.5” HDD Controller Intel 21154 - Intel 21154 Intel 21154 PCI-to-PCI Bridge System Bus 64-bit/33 MHz - 64-bit/33 MHz 64-bit/33 MHz LAN 1 Front I/O Interface Serial 1 (RS-232, RJ-45 connector) Operating System Compatibility Windows 2000/NT 4.0/XP, Red Hat Linux 7.2, Sun Solaris 8.0 Controller Winbond W83782D Hardware Monitor Monitor CPU temperature, 3.3 V/5 V/12 V, fan Output Interrupt, system reset, NMI Watchdog Timer Interval Programmable, 1 ~ 63 sec. Site 1 PMC Interface PCI Mezzanine (IEEE 1386), 32-bit/33 MHz Signal 5 V/3.3 V compliant Solid State Disk CompactFlash socket (optional) ** Miscellaneous Real Time Clock Built-in the South Bridge Maximum +5 V +12 V -12 V 3.3 V Power Requirement (Intel Pentium III 700 MHz) 2.5 A < 270 mA < 25 mA 2.5 A Temperature Operating: 0 ~ 55 °C (32 ~ 131 °F), Non-Operating: -40 ~ 70 °C (-40 ~ 158 °F) Environment Humidity Non-Operating: 95 % @ 60 °C (non-condensing) Vibration (5-500 Hz) Operating: 1.0 Grms, Non-Operating: 2.0 G 7-14 MIC-3368 Industrial Motherboards 1 Specifications Cont. Dimensions (W x D) 233.35 x 160 mm (9.2" x 6.3"), 1-slot width Physical Characteristics Weight 0.7 Kg (1.54 lb) Industrial Motherboard Hot-swap Switch N/A Yes Yes Yes Chassis 2 Hot-swap LED N/A Yes Yes Yes PICMG 2.1, R1.0 Hot-Swap Specification N/A Yes Yes Yes Compliance PICMG 2.16, R1.0 Packet Switching Backplane Specification N/A Yes Yes Yes PICMG Single * PCI-to-PCI bridge is transparent, drives up to 7 PCI masters Board 3 Computers ** CompactFlash socket is supported for special orders (Embedded HDD will not be supported). Industrial Rear Transition Board Computer Chassis 4 CPU Board PMC Module Rear I/O Board Enclosure MIC-3368B RIO-3308-A MIC-3039-B, MIC-3036-A/S2, MIC-3056A, MIC-3038A, MIC-3081A/B, MIC-3082A Industrial MIC-3368C MIC-3665-A RIO-3308C-A MIC-3038C Computer MIC-3665-B MIC-3368E MIC-3039-B, MIC-3036-A/S2, MIC-3056A, MIC-3038A/C/D, MIC-3041A, MIC-3042A, MIC-3081A/B*, RIO-3308C-A, RIO-3308S-A Peripherals 5 MIC-3368E1 MIC-3082A * MIC-3081A doesn’t support RIO-3308S-Ax 6U CompactPCI Recommended Configurations Enclosures 6 Rear Panel On-board Header Part Number Slot Width SCSI KB & Mouse COM2 LAN VGA USB IDE FDD COM1 USB CF PIM Parallel 6U RIO-3308-A - 1 1 2 1 - 1 1 1 1 1 1* 1 1 CompactPCI Boards RIO-3308C-A - 1 1 2 1 1 2 1 1 1 1 - 1 1 7 RIO-3308S-A 1 1 1 2 1 1 2 1 1 1 1 - 1 1 * Optional for OEM/ODM (Please contact your local sales or distributors for details) 6U CompactPCI I/O 8 Ordering Information Front Panel I/O 6U Part Number CompactPCI LAN COM PCI-to-PCI Bridge PMC Site Chipest Slot Width Accessories 9 MIC-3368B-A 1 1 1 1 Intel 440BX 1 MIC-3368C-A 1 1 - 1 Intel 440GX 1 MIC-3368E-A 1 1 1 1 Intel 440GX 1 3U MIC-3368E1-A 1 1 1 1 Intel 440GX 1 CompactPCI Systems 10 Remark: 1. Dual PMC sites are also supported for special order (Embedded HDD or optional CompactFlash will not be supported). 2. MIC-3368 series does not support media blade MIC-3960 because J3 is reserved for PICMG 2.16 design, this also includes MIC-3368B-A. Internet 3. The above part numbers do not include memory, please order separately. Security 4. The MIC-3368C-A has the CompactPCI bridge removed. PICMG 2.16 can be used for inter-processor connectivity. Platforms 11 5. The MIC-3368E and MIC-3368E1 models support PICMG 2.16 but will only function in System controller mode. Network Application Ready 12 Platforms Socket for embedded 2.5" HDD or optional 2nd PMC site (optional) CompactFlash for knock out card for storage 1st PMC site for knock out Onboard Intel 10/100 Mbps LAN ports Pentium III low power 700 MHz (BGA2) CPU LEDs for power, HDD COM LED for hot-swap (for MIC-3368E/E1) One 32-bit PMC 2nd PMC site (must occupied expansion site 2.5" HDD/CompactFlash space) for optional Online Download www.advantech.com/products 7-15