6U CompactPCI 3rd Generation ® Intel Core™ i7 Rugged MIC-3395MIL Processor Blade with ECC Features ® ® ƒ Supports 3rd Generation Intel Core™ i3/i5/i7 processors and Intel QM67 PCH with embedded graphic (dual independent display) ƒ Up to 16 GB (DDR3 1600) ECC memory (max 8GB on board, socket SO-UDIMM x1, max 8 GB) ƒ Conduction cooled with ANSI/VITA30.1-2002 compliancy ƒ Optimized single-slot SBC with 2.5" SATA-III HDD/CFast socket/ on-board flash (optional) ƒ TPM ƒ Two SATA ports, four USB 2.0 ports, two DVI ports, two RS-232 ports, one PS/2 connector, and PCIe x4 interfaces to the Rear Transition Module (RTM) ƒ Six gigabit Ethernet ports for PICMG 2.16, front and rear connectivity ƒ PICMG 2.16 R1.0, PICMG 2.1 R2.0, PICMG 2.6 R1.0 compliant RoHS COMPLIANT 2002/95/EC Introduction MIC-3395MIL, a CompactPCI PICMG2.16 compliant single slot 6U CPU board, offers with two different configurations that meet a wide range of environmental requirements for ruggedized application. Using Intel’s 3rd generation core i7 ULV processors, it offers a low power dissipation design without the need of on-board forced ventilation. Ruggedized requirements are addressed by a condition cooled design an extended operation temperature range (-40° C ~ 70° C). Shock and vibration resistances of the board are increased by using wedge locks and a single-piece CNC-milled aluminum alloy plate that conforms to the major IC packages. With highly integrated functional capabilities, the MIC-3395MIL fully utilizes the I/O features of the Intel chipsets. It supports maximum 16GB of 1600 MHz DDR3 RAM, an onboard 2.5” Serial ATA HDD or SSD, a CFast slot, an onboard NAND flash (as optional), and a set of I/O functions brought through the backplane to a unique rear transition module, which contains two/four LAN ports, two DVI ports, two USB 2.0, one P/S2 port and one RS-232 port on the front panel. Specifications ® CPU Intel 3rd Generation Core i7 ULV up to 2.5 GHz (4MB L2 cache) Processor System Platform Controller Hub Intel QM67 BIOS Redundant AMI 8MByte SPI flash J1 Connector 32-bit PCI local bus J2 Connector 64-bit PCI local bus CompactPCI Interface J3 Connector PICMG2.16 + RTM area J4~J5 Connectors RTM area PCIex8 Gen2 (5GT/s) XMC/PMC Socket PCI 64-bit/66 MHz Technology DDR3 1600 MHz, dual channel with ECC support Memory Max. Capacity Up to 16GB (max. 8GB on-board, max. 8GB SODIMM) Socket 204-pin SODIMM x1 Controller Intel embedded graphic controller Iris (triple independent display) Graphic VRAM Dynamic Resolution Up to 2048 x 1536, 64k colors at 75Hz Controller 5 Intel 82574L single-port Gigabit Ethernet controllers (on PCIe x1 channel) Interface 10/100/1000Base-TX Ethernet I/O Connector PICMG 2.16 and RJ-45 x2 (RTM rear panel), RJ-45 x1 (front panel) Ethernet Controller 1 Intel 82579LM single-port Gigabit Ethernet controller Interface 10/100/1000Base-TX Ethernet I/O Connector RJ-45 (front panel) Onboard HDD/SSD 1 2.5" (SATA-III) Channels Onboard SATA-III connector Onboard Flash SATA-II Storage 1 CFast socket (SATA-II) Channels 1 soldered NAND Flash (SATA-II optional) RTM SATA-III Channels 2 SATA-III connectors USB2.0 1 type A VGA 1 COM 1 RS232 on RJ45 Front I/O LAN 2 10/100/1000 Mbps on RJ45 x1 blue/yellow for Hot Swap/HDD, x1 green for Master/Drone mode, x1 yellow BMC Heartbeat, and x1 green Front Panel LEDs for Power Buttons CPU reset button and BMC reset button All product specifications are subject to change without notice Last updated : 3-Sep-2013 MIC-3395MIL Specifications (Cont.) USB2.0 4 ports COM 2 ports LAN 2 ports Rear I/O SATA 2 SATA-III PCIe 1 PCIex4 Display 1 DVI-I and 1 DVI-D Others PS/2 for keyboard & mouse Output Local Rest and Interrupt Watchdog Timer Interval Programmable 1s ~ 255s Hardware Monitor HWM NCT6776F BMC Controller Renesas H8S 2167, IPMI v2.0 compliant ® Operating System Compatibility Windows 2003/XP SP3/2008/Win7, RHEL 6.1, VxWorks 6.x (on request) Configuration 4HP Power Requirement TDP Maximum: up to 50W (dual core) or less, depending on CPU type Physical Dimension (WxD) 233.35 x 160.0 mm Operating Non-operating Temperature -40 ~ 70° C (-40 ~ 158° F) -40 ~ 85° C (-40 ~ 185° F) Humidity 95 % @ 40° C, non-condensing 95 % @ 60° C, non-condensing Environment Vibration (5-500 Hz) 3.5 Grms (without on-board 2.5" SATA HDD) Bump 25G, 6ms Altitude 15000ft above sea level (without conformal coating) 40000 ft, -40° C, above sea level Regulatory Conformance FCC Class A, CE, RoHS, CCC Compliance Standards PICMG2.0 R3.0, PICMG2.1 R.0, PICMG2.9 R1.0, PICMG2.16 R1.0 Ordering Information Front Panel Main On-board Features System Board USB2.0 Ethernet Console CFast Storage SODIMM Model Number VGA Conduction cool CPU Memory (type A) (RJ45) (RJ45) Socket Channel Socket MIC-3395MILS-P4E 1 1 2 1 - I7-3517UE 4GB 1 1 1 MIC-3395MILC-P4E - - - - Yes I7-3555LE 4GB 1 - - Rear Panel On-board Header/Socket/Connector Part number USB2.0 COM COM SAS (SATA LAN PS/2 DVI-D DVI-I VGA MiniSAS USB COM SATA Slot Width Conn. (type A) (D-SUB9) (RJ45) interface) RIO-3395MIL-A1E 2 2 1 - 1 1 - 1 - - - 2 - 2* J3, J4, J5 RIO-3315-A1E 2 2 - 1 1 1 1 - 1 2 1 2 4 1 J3, J4, J5 RIO-3315-C1E 4 2 - 1 1 1 1 - - 2 1 2 - 1 J3, J4, J5 CPU Information CPU Type # of Core # of Thread DMI Frequency Cache TDP Graphics PCIe I7-3517UE 2 4 5 GT 1.7 GHz 4 MB 17W 350-900GHz Gen 3 I7-3555LE 2 4 5 GT 2.5 GHz 4 MB 25W 550-950GHz Gen 3 Related Products Model number Configuration RTM Module with 2 LAN port, 1 DVI, 1 VGA, 1 COM RIO-3395MIL-A1E (D-SUB9), 2 USB 2.0 RTM Module with SAS Controller for MIC-3395 and RIO-3315-A1E MIC-3395MIL RTM Module with 4 LAN ports and USB2.0 for RIO-3315-C1E MIC-3395 and MIC-3395MIL MIC-3666-AE Dual 10 Gigabit Ethernet XMC CompactPCI PMC with dual copper (RJ-45) Gigabit MIC-3665-AE Ethernet interfaces CompactPCI PMC with dual fiber Gigabit Ethernet MIC-3665-BE interfaces Online Download www.advantech.com/products