® Intel Atom™ N2600/ N2800/ D2700, MI/O Extension SBC, DDR3, HDMI, Dual LVDS, VGA, 2 GbE, CFast, MIO-5250 iManager, MIOe Features NEW ® ƒ Embedded Intel Atom™ N2600/ N2800/ D2700 dual core processor + Intel NM10, 1 x DDR3 memory support up to 4 GB ® ƒ DirectX 9, multiple display: 18/24-bit LVDS1, 48-bit LVDS2, HDMI, VGA ƒ Flexibile design by using integrated multiple I/O: MIOe to approach vertical applications & keep domain knowhow. ƒ 2 GbE support, HD Audio, Rich I/O interface with 4 COM, 1 SATA, SMBUS, 8-bit GPIO, PCIe Mini Card & CFast ƒ Supports iManager, embedded software APIs and Utilities Software APIs: GPIO H/W Brightness Watchdog Backlight SMBus CPU Speed System Monitor On/Off Throttling Utilities: Monitoring eSOS Embedded Security ID iManager Specifications CPU Intel Atom Dual Core processor N2600 1.6GHz/ N2800 1.86GHz / D2700 2.13GHz Frequency Dual Core 1.6GHz/ 1.86GHz / 2.13GHz Processor System L2 Cache 1MB System Chipset Intel Atom N2600/ N2800/ D2700 + Intel NM10 BIOS AMI EFI 32Mbit Technology DDR3 1066MHz (N2800 & D2700), DDR3-800 (N2600) Memory Max. Capacity 4 GB Socket 1 x 204-pin SODIMM Chipset Intel Atom N2600/ N2800/ D2700 DirectX 9 and OpenGL3.0 support Graphic Engine Hardware decode H/W acceleration: MPEG2 H/W Decode/Acceleration: H.264/ VC1/ WMV9 Display 18/24-bit LVDS1: up to 1366 x 768 (18-bit for N2600, N2800), 1440 x 900 (24-bit for D2700) LVDS 48-bit LVDS2: up to 1600x1200 (N2600, N2800), 2560 x 1600 (D2700) (only for MIO-5250D-U1A1E) VGA Up to 1920 x 1200 HDMI Supports 1920 x 1200, Max data rate: up to 1.65 Gb/s, Supports HDMI v1.3 Up to 1080p support Dual Display Yes (VGA + LVDS1 or VGA + HDMI or HDMI + LVDS1 or LVDS1 + LVDS2) Speed 10/100/1000Mbps Ethernet Controller GbE1 Intel 82583V 10/100/1000Mbps, GbE2 Intel 82583V 10/100/1000Mbps Connector 2 RJ45 on Rear I/O Chipset Realtek ALC892, High Definition Audio(HD),Line-in, Line out, Mic-in Audio Amplifier Can be supported via MIOe WatchDog Timer 255 levels timer interval, programmable by software CFast 1 Storage SATA 1 x SATA II (Max. Data Transfer Rate 300 MB/s) Ethernet 2 (10/100/1000Mbps) VGA 1 HDMI 1 Rear I/O USB 4 x USB 2.0 LED Power, Hard disk DC Power 1 (Supported only on MIO-5250D-U1A1E) USB 2 x USB 2.0 Seriel 2 RS-232 from COM1/4, 2 RS-232/422/485 from COM2/3 (ESD protection for RS-232: Air gap ±15kV, Contact ±8kV) Internal I/O SMBUS Supported GPIO 8-bit general purpose input/output PCIe Mini Card 1 (full size) with SIM Holder Expansion MIOe 1 Power Type Single 12V DC power input Power Supply Voltage Supports single 12V input, ± 10% Power Consumption N2600: 0.606 A @ 12 V(7.27W), N2800: 0.715 A @ 12 V(8.58W), D2700: 0.891 A @ 12 V(10.69W) (Typical) Power Power Consumption N2600: 0.729 A @ 12 V (8.75W), N2800: 0.903 A @ 12 V (10.84W), D2700: 1.056 A @ 12 V (12.67W) (Max, test in HCT) Power Management ACPI Battery 3 V / 210 mAH Operational 0 ~ 60° C (32 ~ 140° F) (Operational humidity: 40° C @ 95% RH Non-Condensing) Environment Non-Operational -40° C ~ 85° C and 60° C @ 95% RH Non-Condensing Dimensions (L x W) 146 x 102 mm (5.7" x 4") Physical Characteristics Weight 0.85 kg (1.87 lb), weight of total package MI/O Extension SBC All product specifications are subject to change without notice Last updated : 27-Dec-2011 MIO-5250 DisplayPort 1 Transmitter 48-bit LVDS2 Board Diagram 18/24-bit LVDS1 Intel Atom DDR3 N2600/ N2800/ D2700 SODIMM x 1 VGA I/F VGA DisplayPort 0 HDMI DMI (note1) Intel 82583V PCIe x 1 HD audio line out Intel 82583V PCIe x 1 COM1~COM4 USB 2.0 x 1 (COM2/3: RS-232/422/485) LPC Super I/O Intel NM10 (COM1/4: RS-232) MIOe Auto Flow Control SMBUS PCIe Mini Card LPC w/ SIM Holder PCIe x 1 16MBit 1 x PCIe x 1 SPI SPI BIOS HD Realtek Advantech 6 USB 2.0 SATAII 1 x SATAII iManager ALC 892 CFast 8-bit GPIO SMBUS note 1: Supported by request Ordering Information L2 RS-232/ RS- USB Mini Power Thermal Operational Part No. CPU LVDS1 LVDS2 VGA HDMI GbE1 GbE2 Audio GPIO SATAII CFast MIOe Cache 422/485 232 2.0 Card Connector Solution Temp. Intel Atom MIO-5250N-S6A1E 1MB L2 18-bit - Yes Yes 1 1 Yes 2 2 6 8-bit 1 1 1 Yes DC Jack Fan-less 0 ~ 60° C N2600 1.6G Intel Atom MIO-5250N-S8A1E 1MB L2 18-bit - Yes Yes 1 1 Yes 2 2 6 8-bit 1 1 1 Yes DC Jack Fan-less 0 ~ 60° C N2800 1.86G Intel Atom MIO-5250D-U1A1E 1MB L2 24-bit 48-bit Yes Yes 1 1 Yes 2 2 6 8-bit 1 1 1 Yes 2x2 type Fan-less 0 ~ 60° C D2700 2.13G Packing List Optional Accessories Part No. Description Quantity Part No. Description MIO-5250 SBC Heat spreader for MIO-5250 (137 x 84.2 x 16.7 mm) Startup Manual USB5/6 cable Utility CD 1700008941 SATA cable 7P 32CM C=R 180/180D W/Lock 1 Embedded OS/API 1700018785 SATA 35cm power cable 1 COM RS-485 D-SUB 9P (M)/1*4P 2.0 25cm 1700019435 2 Embedded OS/API Description cable WinCE 7.0 COM RS232 Cable 2*10P-2.0/D-SUB 9P 1701200220 2 Win XPE (M)*2 22CM WES 7 1700019584 Audio Cable 2*5P-2.0/JACK*3 20cm 1 Linux 9689000002 mini Jumper pack Software API Rear I/O View MIO-5250N-S6A1E MIO-5250D-U1A1E MIO-5250N-S8A1E Online Download www.advantech.com/products Value-Added Software Services Software API: An interface that defines the ways by which an application program may request services from libraries and/or operating systems. Provides not only the underlying drivers required but also a rich set of user-friendly, intelligent and integrated interfaces, which speeds development, enhances security and offers add-on value for Advantech platforms. It plays the role of catalyst between developer and solution, and makes Advantech embedded platforms easier and simpler to adopt and operate with customer applications. Software APIs Control Monitor General Purpose Input/Output is a flexible parallel interface A watchdog timer (WDT) is a device that performs a specific that allows a variety of custom connections. It allows users operation after a certain period of time if something goes wrong to monitor the level of signal input or set the output status to and the system does not recover on its own. switch on/off a device. Our API also provides Programmable A watchdog timer can be programmed to perform a warm boot GPIO, which allows developers to dynamically set the GPIO (restarting the system) after a certain number of seconds. input or output status. ® SMBus is the System Management Bus defined by Intel Corporation in 1995. It is used in personal computers and servers for low-speed system management communications. The Hardware Monitor (HWM) API is a system health The SMBus API allows a developer to interface a embedded supervision API that inspects certain condition indexes, such as system environment and transfer serial messages using the fan speed, temperature and voltage. SMBus protocols, allowing multiple simultaneous device control. 2 I C is a bi-directional two wire bus that was developed by Philips for use in their televisions in the 1980s. The Hardware Control API allows developers to set the PWM 2 The I C API allows a developer to interface with an embedded (Pulse Width Modulation) value to adjust fan speed or other 2 system environment and transfer serial messages using the I C devices; it can also be used to adjust the LCD brightness. protocols, allowing multiple simultaneous device control. Display Power Saving Make use of Intel SpeedStep technology to reduce power power The Brightness Control API allows a developer to interface with consumption. The system will automatically adjust the CPU an embedded device to easily control brightness. Speed depending on system loading. Refers to a series of methods for reducing power consumption in The Backlight API allows a developer to control the backlight computers by lowering the clock frequency. These APIs allow the (screen) on/off in an embedded device. user to lower the clock from 87.5% to 12.5%. Software Utilities The BIOS Flash utility allows customers to update the flash The eSOS is a small OS stored in BIOS ROM. It will boot up in ROM BIOS version, or use it to back up current BIOS by case of a main OS crash. It will diagnose the hardware status, copying it from the flash chip to a file on customers’ disk. The and then send an e-mail to a designated administrator. The BIOS Flash utility also provides a command line version and eSOS also provides remote connection: Telnet server and FTP API for fast implementation into customized applications. server, allowing the administrator to rescue the system. The embedded application is the most important property of Flash Lock is a mechanism that binds the board and CF card a system integrator. It contains valuable intellectual property, (SQFlash) together. The user can “Lock” SQFlash via the Flash design knowledge and innovation, but it is easily copied! The Lock function and “Unlock” it via BIOS while booting. A locked Embedded Security ID utility provides reliable security functions SQFlash cannot be read by any card reader or boot from other for customers to secure their application data within embedded platforms without a BIOS with the “Unlock” feature. BIOS. The Monitoring utility allows the customer to monitor system health, including voltage, CPU and system temperature and fan speed. These items are important to a device; if critical errors happen and are not solved immediately, permanent damage may be caused. All product specifications are subject to change without notice Last updated : 27-Dec-2011