PCA-6153 Half-size Pentium® MMX CPU Card with VGA/LCD ® PCA-6153 Pentium MMX CPU Card with VGA/LCD Startup Manual Green function: Features power management via the Packing List BIOS, activated by mouse or keyboard activity. Supports doze, sleep, standby and suspend modes. Before you begin installing your card, please make APM 1.1 compliant sure that the following materials have been shipped: 2nd level cache: 512 KB pipeline burst SRAM • 1 PCA-6153 CPU card RAM: Two 72-pin SIMM sockets. Supports 32-bit 1 6-pin mini-DIN keyboard and PS/2 mouse adaptor Normal or EDODRAM with memory capacity from 2 MB to 64 MB 1 hard disk drive (IDE) interface cables Enhanced IDE interface: Handles up to two IDE 1 parallel /1 serial port cable adaptor large HDDs orother IDE devices. Supports PIO mode ® 4 and DMA bus-mastermode1 CPU cooling fan for PGA socket Pentium MMX use Floppy disk drive interface: Supports up to two floppy disk drives: 3½” (720 KB or 1.44 MB) and/or1 floppy disk drive interface cable (34-pin) 5¼” (360 KB or 1.2 MB) 2 VGA driver utility disks Parallel port: One parallel port configured to LPT1, 1 system utility disk LPT2, LPT3or disabled. Supports multimode parallel (SPP/EPP/ECP) port Serial ports: One RS-232, one RS-232/422/485 If any of these items are missing or damaged, contact interface your distributor or sales representative immediately. Watchdog timer: Can generate a system reset or IRQ 15. Software enabled/disabled. Time interval is Note 1: For detailed contents of the from 1 to 63 seconds, jumperless with run-time setup PCA-6153, please refer to the enclosed CD-ROM or disk (in PDF format).Keyboard and PS/2 mouse connector: A 6-pin mini- DIN connector is located on the mounting bracket for Note 2: Acrobat Reader is required to view any PDF easy connection to a keyboard or PS/2 mouse. An file. Acrobat Reader can be downloaded at: on-board keyboard pin header connector is also www.adobe.com/Prodindex/acrobat/ available. readstep.html (Acrobat is a trademark of Adobe.) PC/104 expansion: 104-pin, 16-bit PC/104 module connector Specifications I/O bus expansion: ISA bus edge (golden finger) Standard SBC Functions connector ® ®CPU: Intel Pentium 75/90/100/120/133/150/166 200 MHz and P55C, AMD K5, Cyrix 6x86 K6-200 PCI SVGA Interface BIOS: Award 128 KB Flash memory; supports PlugController: C&T 65545/48/50 VGA (default=65550) and Play Display memory: 2 MB on-board DRAM Chipset: SiS 5571 Display resolution: - supports panel resolutions up to 1024 x 768 For more information on this and other Advantech - supports non-interlaced CRT monitors, 1280 x 1024 products, please visit our website at: with 16 colors http://www.advantech.com http://www.advantech.com/epc Mechanical and Environmental For technical support and service, please visit our support website at: • Board size: 185 mm x 122 mm Max. power requirements : +5 V (4.75 to 5.25 V) http://support.advantech.com @ 5.5 A This manual is for the PCA-6153 series Rev.A1 Operating temperature : 0 ~ 60° C (32 ~ 140° F) Part No. 2006615310 1st Edition Board weight : 0.5 kg (1.2 lbs.) Printed in Taiwan Oct. 1999 Board Layout: Jumper Locations Jumpers and Connectors J10 Connectors on the board link it to external devices J 9 J 6 J 8 such as hard diskdrives, a keyboard, or floppy drives. In addition, the board hasjumpers which you use to configure it for your application. The table below lists the function of each of the board jumpers andconnectors. Later sections in this chapter J 7 give instructions on setting jumpers and detailed information on each jumper setting. Chapter 2 gives instructions for connecting external devices to your card. J 5 PCA-6153 Jumpers Number Function J1 Chipset optimal timing settings J 3 J2 CPU working voltage setting J3 CPU clock ratio setting (pins 3-4, 5-6) Enable P55CT (pins 1-2), P55CT f ratio = 1(pins 7-8) J4 Cache mode setting J 4 J5 CPU/PCI clock setting J6 CMOS setup J 2 J7 Watchdog timer control J8 RS-232/RS-422/RS-485 pin out select J 1 J9 RS-232/RS-422/RS-485 select J10 LCD voltage selector PCA-6153 Connectors Board Layout: Connector Locations Number Function CN1 Keyboad lock/ Power LED CN12 CN8 CN14 CN15 CN16 CN9 CN17 CN10 CN18 CN2 PC/104 connector CN3 PC/104 connector CN13 CN4 Enhanced IDE connector CN6 CN5 Flat panel connector CN11 CN6 Fan power CN7 Parallel port connector (printer) CN7 CN3 CN8 Peripheral power input connector CN9 Floppy disk drive connector CN5 CN10 COM2 connector CN11 Auxiliary keyboard connector CN4 CN12 Hard drive activity LED connector CN13 Reset connector CN2 CN14 Speaker out connector CN1 CN15 Main power connector CN16 VGA connector CN17 COM1 connector CN18 Keyboard and PS/2 mouse connector SOCKET 1 SOCKET 2 2 PCA-6153 Startup Manual Jumper Settings J1 J2 CPU Working Voltage 1 4 CN14 1-2: VCC2 = 2.8 V (for P55CT) → 2-3: VCC2 = 3.3 V (for P54C)* Internal Buzzer 3-4 CLOSED Enable ↓ 3-4 OPEN Disable Chipset Optimal Timing 1-2 CLOSED: Enable P55CT (MMX) 1-2 3-4 5-6 DPLL 2 8 Clock Ratio J3 1 7 COM2 Output Select CLOSED OPEN OPEN 75 MHz 3-4 5-6 7-8 f-Ratio 1-2: RS-232* OPEN CLOSED OPEN 66 MHz* CLOSED CLOSED OPEN 2.5 → 3-4: RS-422 CLOSED CLOSED OPEN 60 MHz CLOSED OPEN OPEN 2* CLOSED OPEN CLOSED 50 MHz 2 6 5-6: RS-485 OPEN CLOSED OPEN 3 J9 1 5 OPEN OPEN OPEN 1.5/3.5 J4 CPU Type Select (J2, J3, J5) ® Pentium chip Cache Mode AMD K5 CPU CLOSED: for Cyrix linear mode 1 J10 ® Cyrix 6x86 clock x f-Ratio J6 *OPEN: Intel CPU 3 LCD Voltage Selector 75 MHz 50 MHz x 1.5 CMOS Setup 1-2: 3.3 V 90 MHz 60 MHz x 1.5 2-3: 5 V 1-2: Normal operation 100 MHz 66 MHz x 1.5 6 5 2-3: Clear CMOS 120 MHz 60 MHz x 2 J5 2 1 *133 MHz 66 MHz x 2 150 MHz 60 MHz x 2.5 CPU/PCI Clock 166 MHz 66 MHz x 2.5 1-2 3-4 5-6 CPU PCI 200 MHz 66 MHz x 3 CLOCK CLOCK 233 MHz 66 MHz x 3.5 CLOSED CLOSED CLOSED 55 MHz 27.6 MHz COM2 Output Select OPEN CLOSED CLOSED 75 MHz 32 MHz → 1-2, 4-5, 7-8, 10-11 CLOSED for RS-232* OPEN OPEN CLOSED 40 MHz 32 MHz 2-3, 5-6, 8-9, 11-12 CLOSED for RS-422/485 CLOSED CLOSED OPEN 50 MHz 33.3 MHz 1 1 4 7 10 OPEN CLOSED OPEN 50 MHz 25 MHz J7 J8 CLOSED OPEN OPEN 60 MHz 30 MHz 3 3 6 9 12 OPEN OPEN OPEN 66 MHz 33 MHz* ↓ Watchdog Timer * denotes default setting 1-2: Watchdog generates system reset signal* 2-3: Watchdog generates IRQ15