PCM-4386 - ADVANTECH - Advantech Boards

Description

on-board Intel Celeron M EPIC CPU Module

Part Number

PCM-4386

Price

Request Quote

Manufacturer

ADVANTECH

Lead Time

Request Quote

Category

Single Board Computers

Specifications

Form Factor

ATX

Ethernet Chipset

Intel 82551

Video Chipset

Intel 852GM

Audio

ICH4 AC97 3D surround stereo sound Supports Line-in, Line-out, Mic-in (with PCM-410 option)

Battery

2-pin wafer box for external Battery on board

BIOS

AWARD® 4 Mbit Flash BIOS

Chipset

Intel 852GM chip integrated. (Extreme Graphics 2)
Intel 852GM GMCH/ICH4 Chipset

Controller

Intel 82551, optional 82541PI (Gigabit for optional)

CPU

Embedded Intel Celeron M

Dimensions

115 x 165 mm (4.5" x 6.5") 0.85 kg (weight of total package)

Display Interface

CRT + 36-bit LVDS

Expansion Interface

Supports 8/16 bit ISA bus for standard PC/104 device (ITE 8888g), PC/104-Plus

Gross Weight

8-bit general purpose input/output

I/O Chipset

1 x EIDE (UDMA 33), 1 x FDD, 1 x K/B, UDMA 100 with PCM-063 riser card, 1 x KB/mouse, 3 x RS232, 1 x RS232/422/485, 1 x LPT

Input

2 x RJ45

IR Interface

N/A

LCD Controller

Hirose connector support up to 2 channel (2 x 18-bit) LVDS LCD Panel

LCD Interface

2 Channel (2 x 18/36-bit) LVDS

Memory

Optimized Shared Memory Architecture, supports up to 64 MB frame buffer using system memory

Operating Humidity

0% ~ 90% relative humidity, non-condensing

Operating Temperature

0 ~ 60° C (32 ~ 140° F)

Power Consumption

(Celeron M 600 with 256 MB DDR266) Max (HCT): 2.63 A @ 5 V, 0.03 A @ 12 V Typical: 2.62 A @ 5 V, 0.03 A @ 12 V, 0.49 A @ 3.3 V, 1.08 A @ 5 VSB

Power Management

APM1.2, ACPI support

Power Supply

ATX, +5 V ± 5%, ±12 V ± 5% A2 version support: AT, 5 V only to boot up, 12 V for LCD inverter and PC/104 module (12 V optional for PC/104 add on card and LCD inverter)

Resolutions

CRT Display mode: pixel resolution up to 1600 x 1200 at 85-Hz and 2048 x 1536 at 75-Hz LCD Display mode: Dual channel LVDS panel supports up to UXGA panel resolution with frequency range from 25 MHz to 112 MHz

Speed

10/100 Mbps

SSD

Supports CompactFlash® Card TYPE I/II (shared 2nd IDE Channel) USB memory, uDOC (option)

System Memory

200-pin SODIMM socket, Rate (DDR) 128 MB to 1 GB, accept 128/256/512/1 GB DDR200/266 DRAM

System Monitor

IEEE 802.3u 100Base-T

USB

6 x USB 2.0 compliant Ports (2 ports on board connector, 4 ports pinhead)

Watchdog Timer

Single chip Watchdog 255-level interval timer, setup by software

Features

Display Combination: CRT + LVDS display support
Dual 10/100/1000 Mbps PCI Ethernet interface
Embedded Celeron® M Processor on board and support for PC/104-Plus bus
EPIC form factor (115 mm x 165 mm)
SODIMM socket supports up to 1GB DDR SDRAM (optional)
Support ATX/ AT power
Support Compact Flash/uDOC (option)
Support four COM & four USB 2.0 ports

Datasheet

ADVANTECH-PCM-4386-datasheet.pdf

109 KiB

Download

Extracted Text

Onboard Intel® Celeron® M PCM-4386 EPIC CPU Module Features Battery connector Power Switch  EPIC form factor (115 mm x 165 mm)  Embedded Celeron® M Processor on board and support for PC/104-Plus bus RS422/485  SODIMM socket supports up to 1GB DDR SDRAM (optional)  Display Combination: CRT + LVDS display support ATX Power IDE connector  Support four COM & four USB 2.0 ports COM2/RS232  Dual 10/100/1000 Mbps PCI Ethernet interface 422/485 selection GPIO  Support Compact Flash/uDOC (option) ISA _-5V COM2/3/4/LPT  Support ATX/ AT power LVDS Connector Inverter Power HD & Power LED LAN2 LAN1 KB_MS VGA CON COM1 USB0/1 USB2/3/AC97 System FAN  Resolution CRT Display mode: pixel resolution up to 1600 x 1200 Specifications at 85-Hz and 2048 x 1536 at 75-Hz LCD Display mode: Dual channel LVDS panel supports General up to UXGA panel resolution with frequency range from  CPU Embedded Intel Celeron M 25 MHz to 112 MHz  System Chipset Intel 852GM GMCH/ICH4 Chipset  LCD Interface 2 Channel (2 x 18/36-bit) LVDS  BIOS AWARD® 4 Mbit Flash BIOS  LVDS Hirose connector support up to 2 channel (2 x 18-bit)  System Memory 200-pin SODIMM socket, Rate (DDR) 128 MB to 1 GB, LVDS LCD Panel accept 128/256/512/1 GB DDR200/266 DRAM  Dual Independent CRT + 36-bit LVDS  Power Management APM1.2, ACPI support Mechanical and Environmental  SSD Supports CompactFlash® Card TYPE I/II (shared 2nd IDE Channel)  Dimension (LxW) 115 x 165 mm (4.5" x 6.5") USB memory, uDOC (option)  Weight 0.85 kg (weight of total package)  Watchdog Timer Single chip Watchdog 255-level interval timer, setup  Operating Temperature 0 ~ 60° C (32 ~ 140° F) by software  Operating Humidity 0% ~ 90% relative humidity, non-condensing  Expansion Interface Supports 8/16 bit ISA bus for standard PC/104 device (ITE 8888g), PC/104-Plus Power  Battery 2-pin wafer box for external Battery on board  Power Supply Voltage ATX, +5 V ± 5%, ±12 V ± 5% A2 version support: AT, 5 V only to boot up, 12 V for I/O LCD inverter and PC/104 module (12 V optional for  I/O Interface 1 x EIDE (UDMA 33), 1 x FDD, 1 x K/B, UDMA 100 PC/104 add on card and LCD inverter) with PCM-063 riser card, 1 x KB/mouse, 3 x RS232,  Power Consumption (Celeron M 600 with 256 MB DDR266) 1 x RS232/422/485, 1 x LPT Max (HCT): 2.63 A @ 5 V, 0.03 A @ 12 V  USB 6 x USB 2.0 compliant Ports (2 ports on board Typical: 2.62 A @ 5 V, 0.03 A @ 12 V, 0.49 A @ 3.3 V, connector, 4 ports pinhead) 1.08 A @ 5 VSB  Audio ICH4 AC97 3D surround stereo sound Supports Line-in, Line-out, Mic-in (with PCM-410 Packing List option)  1 x PCM-4386 SBC  IrDA N/A  1 x Mini Jumper Pack (p/n:9689000002)  GPIO 8-bit general purpose input/output  1 x Startup Manual Ethernet  1 x Utility CD  Chipset Intel 82551, optional 82541PI (Gigabit for optional)  1 x 3 COM and LPT cable (p/n:1700002034)  Speed 10/100 Mbps  1 x ATX power cable (p/n:1700002055)  Interface 2 x RJ45  1 x 6P-6P-6P PS/2 KB/MS (p/n:1700060202)  Standard IEEE 802.3u 100Base-T  1 x USB cable 2 port/20pin (p/n:1700004891 )  1 x IDE cable (p/n:1701440504) Display  1 x USB CABLE 2 port/10pin (p/n:1700001267)  Chipset Intel 852GM chip integrated. (Extreme Graphics 2)  1 x AT power cable (p/n:1700003931)  Memory Size Optimized Shared Memory Architecture, supports up to 64 MB frame buffer using system memory Stackable SBCs PCM-4386 Board Diagram Intel CeleronM processor LVDSConnector DDR 852GM DIMM VGAConnector LPT LAN 2LAN 6USB2.0 chip Connector COM Audio 1/2 Super ICH4 I/O COM IDE 3/4 CF KB/ PCI-104connector Mouse PC/104 connector Ordering Information L2 USB Operation Thermal Number CPU Chipset 10/100 LVDS COM GPIO LPT CF USB-DOM Audio PC/104-plus cache 2.0 Temp. Solution Celeron M 2 channel PCM-4386F-M0A2E 512K 852 GM 2 4 4 ports 8 1 Yes -- Optional Yes 0 ~ 60° C Passive 600 MHz 36/48-bit Celeron M 2 channel PCM-4386F-S0A2E 0 852 GME 2 4 4 ports 8 1 Yes -- Optional Yes 0 ~ 60° C Passive 1.0 GHz 36/48-bit Celeron M 2 channel PCM-4386Z2-S0A2E 0 852 GME 2 4 4 ports 8 1 Yes -- Optional Yes -40° C ~ 85° C * Passive 1.0 GHz 36/48-bit Celeron M 2 channel PCM-4386U-S0A2E 0 852 GME 2 4 4 ports 8 1 -- Yes Optional Yes 0 ~ 60° C Passive 1.0 GHz 36/48-bit Celeron M 2 channel PCM-4386FY-S0A2E 0 852 GME 2 4 4 ports 8 1 Yes -- Optional Yes -40° C ~ 85° C * Passive 1.0 GHz 36/48-bit * PCM-4386Z2-S0A2E passed 16 hrs of dynamic burn-in test, perfect for fast-changing environments. * PCM-4386FY-S0A1E is Phoebus -40 ~ 85º C design-in, operates continuously under -40 ~ 85º C for at least 8 hrs. For details, please visit http://www.advantech.com.tw/epc/RuggedizedSolutions/ Optional Accessories  PCD-USBH1I-MS0256 USB-DOM, 256 MB, -40 ~ 85° C  PCD-USBH1I-MS0512 USB-DOM, 512 MB, -40 ~ 85° C  PCD-USBH1I-MS1024 USB-DOM, 1 GB, -40 ~ 85° C  PCD-USBH1I-MS2048 USB-DOM, 2 GB, -40 ~ 8 5° C  IDE to CF module (p/n: 9696290100)  PCM-410A-00A1E AC 97 Audio/USB module for PCM-4380/4386 series  PCM-410C-00A1E COM/LPT daughter board for EPIC Online Download www.advantech.com/products PCI Bus ISABus

Frequently asked questions

We specialize in procuring industrial parts at GID Industrial, the company behind Advantech Boards. We are able to find rare and obsolete equipment that our customers need so they can get back to business. We know you have many options when it comes to making your purchase, and we appreciate the opportunity to show your our commitment to quality.

For most parts, a warrranty will be offered, but it depends on what we negotiate with our suppliers. There are some situations where a part is sold without a warranty. Since we specialize in single board computers, they usually receive a one-year warranty.

We are able to ship parts via the major carriers (FedEx, UPS, DHL, USPS). We usually ship on our own accounts, but if you would like to provide us with your own, we can do that, as well. We are not limited to those, however, and can use other carriers at your request.

We are happy to serve customers all over the world. We do a lot of business with customers outside the USA, and we regularly ship to buyers across the globe as a result.

The credit cards Advantech Boards accepts include Visa, MasterCard, Discover, and American Express. You can also pay with a wire transfer or PayPal. If you're in the USA, you can send a check. We may, upon approval, be able to offer terms for larger orders.

What they say about us

FANTASTIC RESOURCE

One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!

Bucher Emhart Glass

EXCELLENT SERVICE

With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.

Fuji

HARD TO FIND A BETTER PROVIDER

Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.

Applied Materials

CONSISTENTLY DELIVERS QUALITY SOLUTIONS

Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.

Nidec Vamco

TERRIFIC RESOURCE

This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.

Trican Well Service

GO TO SOURCE

When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.

ConAgra Foods

Why buy from GID?

What they say about us

Related Products