Manufacturers
ADVANTECH PCM-5862
Description
Pentium -based SBC with Audio, VGA/LCD, and Ethernet
Part Number
PCM-5862
Price
Request Quote
Manufacturer
ADVANTECH
Lead Time
Request Quote
Category
Single Board Computers
Specifications
System Chipset
SiS 5571
Form Factor
PCI
Ethernet Chipset
Realtek RTL8029
Video Chipset
C&T 65550
2nd level cache
On-board 512 KB Pipelined Burst SRAM
Audio Chipset
ESS 1868 or 1869
Audio controller
16-bit codec, Sound Blaster Pro compatible
Audio interface
Microphone in, Line in, CD audio in, Line out, Speaker out
Audio Power
Accepts +12 V source for improved audio quality
BIOS
AWARD 128 KB Flash BIOS, supports Plug&Play, APM
Board Type
5.25 in
Chipset
SiS 5571
CPU
Intel Pentium , Pentium MMX, up to 233 MHz; AMD K5; Cyrix 6x86
CRT resolution
Supports non-interlaced CRT and LCD monitors up to 1024 x 768 @ 256 colors with 1MB on-board display memory
Display memory
1 MB on-board memory, supports up to 2 MB
Display type
Simultaneously supports CRT and flat panel (EL, LCD, and gas plasma) displays
Enhanced IDE interface
Supports two EIDE devices
Ethernet (LAN) Chipset
REALTEK RTL8029 Ethernet controller
Ethernet interface
Novell NE2000 compatible 10Base-T interface. Includes drivers & boot ROM
FDD interface
Supports up to two FDDs (360K / 1.2 M / 720 K / 1.44 MB / 2.88 MB)
Green function
APM 1.1 compliant
I/O bus expansion
One 32-bit PCI bus expansion slot
Keyboard/mouse connector
8-pin header connector for keyboard and PS/2 mouse
Max. power requirements
7 A @ 5 V (4.75 V ~ 5.25 V)
Operating temperature
0 ~ 60° C (32 ~ 140° F)
Parallel port
One parallel port, supports SPP/EPP/ECP parallel mode
PC/104 expansion
104-pin 16-bit PC/104 module connector
Processor
Intel Pentium MMX
RAM
Two 72-pin SIMM sockets accept 8 ~ 128 MB EDO/FPM DRAM
Serial ports
Four serial RS-232 ports; three RS-232 (COM1, 3, 4)and one RS-232/422/485 (COM2). All ports with 16C550 compatible UARTs
Size (L x W)
203 mm x 146 mm (8" x 5.75")
Stereo sound
Full-duplex, integrated 3D audio
USB interface
two USB connectors with fuse protection. Compliant with USB Spec. Rev. 1.0 (optional)
Watchdog timer
63-level interval from 1 ~ 63 seconds. Generates system reset or IRQ15. Jumperless selection and software enabled/disabled
Weight
0.32 kg (0.7 lbs) (w/o package)
Datasheet
Extracted Text
® PCM-5862/L Pentium -based SBC with Audio, Ethernet,and VGA/LCD ® PCM-5862/5862L Pentium -based SBC with Audio, VGA/LCD, and Ethernet Startup Manual Specifications Specifications Specifications Specifications Specifications Packing list Packing list Packing list Packing list Packing list Before you begin installing your card, please make Standard SBC functions sure that the following materials have been shipped: • CPU: • 1 PCM-5862/5862L All-in-one single board computer ® ® ® Intel Pentium , Pentium MMX, up to 233 MHz • 1 Startup Manual AMD K5 • 1 CD-ROM or disk for utility, drivers, and manual (in Cyrix 6x86 pdf format) • BIOS: AWARD 128 KB Flash BIOS, supports Plug&Play, APM If any of these items are missing or damaged, contact • Chipset: SiS 5571 your distributor or sales representative immediately. • Green function: APM 1.1 compliant Note: For detailed contents of the • 2nd level cache: On-board 512 KB Pipelined PCM-5862/5862L, please refer to the Burst SRAM enclosed CD-ROM or Disk (in • RAM: Two 72-pin SIMM sockets accept 8 ~ PDF format). 128 MB EDO/FPM DRAM • Enhanced IDE interface: Supports two EIDE devices • FDD interface: Supports up to two FDDs (360 K / 1.2 M / 720 K / 1.44 MB / 2.88 MB) • Parallel port: One parallel port, supports SPP/ EPP/ECP parallel mode • Serial ports: Four serial RS-232 ports; three RS-232 (COM1, 3, 4)and one RS-232/422/485 (COM2). All ports with 16C550 compatible UARTs • Watchdog timer: 63-level interval from 1 ~ 63 seconds. Generates system reset or IRQ15. Jumperless selection and software enabled/ disabled • Keyboard/mouse connector: 8-pin header connector for keyboard and PS/2 mouse • USB interface: two USB connectors with fuse protection. Compliant with USB Spec. Rev. 1.0 (optional) • PC/104 expansion: 104-pin 16-bit PC/104 module connector For more information on this and other Advantech • I/O bus expansion: One 32-bit PCI bus products please visit our website at: expansion slot http://www.advantech.com http://www.advantech.com/epc PCI SVGA/flat panel interface For technical support and service for please visit our • Chipset: C&T 65550 support website at: • Display memory: 1 MB on-board memory, supports up to 2 MB http://support.advantech.com • Display type: Simultaneously supports CRT This manual is for the PCM-5862/5862L. and flat panel (EL, LCD, and gas plasma) Part No. 2006586230 1st edition displays Printed in Taiwan July 1999 1 3 5 1 3 5 1 3 5 1 3 5 1 3 5 • CRT resolution: Supports non-interlaced CRT and J16 Audio power source setting LCD monitors up to 1024 x 768 @ 256 colors with 1 Connectors MB on-board display memory Label Function CN1 CRT display connector Audio function (PCM-5862 only) CN2 Flat panel display connector • Chipset: ESS 1868 or 1869 CN3 PC/104 ISA-bus expansion • Audio controller: 16-bit codec, Sound Blaster Pro CN4 USB channel 1 connector compatible CN5 USB channel 2 connector CN6 Fan power connector • Stereo sound: Full-duplex, integrated 3D audio CN7 Front panel connector • Audio interface: Microphone in, Line in, CD audio CN8 CD audio input connector in, Line out, Speaker out CN9 PC/104 ISA-bus expansion • Power: Accepts +12 V source for improved audio CN10 Peripheral power connector quality CN11 Ethernet 10Base-T connector CN12 IR connector Ethernet interface CN13 Audio connector CN14 Main power connector • Chipset: REALTEK RTL8029 Ethernet controller CN15 Keyboard and PS/2 mouse • Ethernet interface: Novell NE2000 compatible connector 10Base-T interface. Includes drivers & boot ROM CN16 COM-port connector CN17 IDE hard drive connector Mechanical and environmental CN18 Floppy drive connector • Max. power requirements: 7 A @ 5 V (4.75 V ~ CN19 Parallel port connector 5.25 V) Jumper settings • Operating temperature: 0 ~ 60° C (32 ~ 140° F) • Size (L x W): 203 mm x 146 mm (8" x 5.75") J1 & J2: System/PCI clock setting • Weight: 0.32 kg (0.7 lbs) (w/o package) System 50MHz 50MHz 60MHz *66MHz 75MHz PCI 25 33.3 30 *33.3 32 1 3 5 1 3 5 1 3 5 J1 2 4 6 2 4 6 2 4 6 2 4 6 1 3 5 1 3 5 1 3 5 Jumpers and connectors Jumpers and connectors Jumpers and connectors Jumpers and connectors Jumpers and connectors J2 The PCM-5862/5862L has a number of jumpers that 2 4 6 2 4 6 2 4 6 2 4 6 allow you to configure your system to suit your applications. The table below lists the function of each J3: CPU voltage setting of the board's jumpers. 2.5 V 2.8 V 3 V *3.3 V 1 3 1 3 1 3 1 3 Jumpers 2 4 2 4 2 4 2 4 Label Function J4: CPU frequency ratio J1 System/PCI clock setting J2 System/PCI clock setting 1.5 *2 2.5 3 1 3 5 1 3 5 1 3 5 J3 CPU voltage setting J4 CPU frequency ratio setting/ P55C enabled/disabled 2 4 6 2 4 6 2 4 6 J5 M1 cache linear mode setting J6 CMOS clear J4: P55C enabled/disabled J7 Buzzer enable/disable P55C enabled *P55C disabled J8 COM4 IRQ occupied/released 1 3 5 1 3 5 J9 COM3 IRQ occupied/released J10 LCD power setting 2 4 6 2 4 6 J11 COM4 RI pin setting J12 COM3 RI pin setting J13 Watchdog timer action J14 COM2 RS-232/422/485 setting J15 COM2 RS-232/422/485 setting 2 PCM-5862/5862L Startup Manual 2 4 6 2 4 6 2 4 6 J5: M1 cache linear mode enabled/disabled J14 & J15: COM2 RS-232/422/485 *enabled disabled *RS-232 RS-422 RS-485 1 3 5 1 3 5 1 3 5 J14 2 4 6 2 4 6 2 4 6 12 11 10 12 11 10 12 11 10 J6: Clear CMOS *3.6 V battery on clear CMOS J15 1 2 3 1 2 3 3 2 1 3 2 1 3 2 1 J7: Buzzer enabled/disabled *enabled disabled J16: Audio power source setting *+5 V +12 V 1 2 3 1 2 3 J8: COM4 IRQ occupied/released *occupied released J9: COM3 occupied/released *occupied released J10: LCD power setting *5 V 3.3 V 1 3 5 1 3 5 2 4 6 2 4 6 J11: COM4 RI pin setting +5 V +12 V *RI 1 3 5 1 3 5 1 3 5 2 4 6 2 4 6 2 4 6 J12: COM3 RI pin setting +5 V +12 V *RI 1 3 5 1 3 5 1 3 5 2 4 6 2 4 6 2 4 6 J13: Watchdog timer action *System reset IRQ15 1 1 2 2 3 3 Locating jumpers Mechanical drawings Mechanical drawings Mechanical drawings Mechanical drawings Mechanical drawings J13 J14 J15 J16 J12 J11 J10 J9 J7 J8 J4 J3 J2 J1 J5 J6 Locating connectors CN16 CN19 CN15 CN18 CN17 CN14 CN13 CN12 CN9 CN3 CN11 CN10 CN7 CN8 CN5 CN4 CN2 CN1 CN6 4 PCM-5862/5862L Startup Manual
Frequently asked questions
Why do business with Advantech Boards?
Will there be a warranty for the PCM-5862?
Which companies are available as carriers?
I don't live in the USA. Will Advantech Boards work with me?
Will Advantech Boards accept my preferred method of payment?
Why buy from GID?
Quality
We are industry veterans who take pride in our work
Protection
Avoid the dangers of risky trading in the gray market
Access
Our network of suppliers is ready and at your disposal
Savings
Maintain legacy systems to prevent costly downtime
Speed
Time is of the essence, and we are respectful of yours
Related Products
ISA 486 Slot-PC SBC, with VGA/LCD/LAN/DOC and PC/104
Advantech 1906618403 CPU Board. VGA/LAN/HISA-(FSB 533) rev A2 Processor System CPU Intel Pentium 4, ...
Advantech 1906618608 CPU Boards. Socket 478 | Pentium 4/Celeron Processor | VGA/Dual Gigabit LAN | H...
Advantech 1906957112 CPU Board
Socket 370 SBC with 3 LAN, and VGA/LCD
LGA 775 Core 2 Duo/Pentium D/ Pentium 4/Celeron D Processor-based ATX with DDR2/PCIe/Dual GbE LAN
Request a Quote
The quote request has been received
Close
Facing challenges or have inquiries? Feel free to contact us!
Call Us +1-469-283-2440
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods