PCM-5862EL-02A1 - ADVANTECH - Advantech Boards

Description

Pentium -based SBC with Audio, VGA/LCD, and Ethernet

Part Number

PCM-5862EL-02A1

Price

Request Quote

Manufacturer

ADVANTECH

Lead Time

Request Quote

Category

Single Board Computers

Specifications

System Chipset

SiS 5571

Form Factor

ATX

Ethernet Chipset

Realtek RTL8029

Video Chipset

C&T 65550

Features

32-bit PCI-bus 100Mbps Ethernet interface, IEEE 802.3U protocal
32-bit PCI-bus SVGA/LCD controller supports LCD & CRT displays
4 serial ports (three RS-232 and one RS-232/422/485)
Accepts Intel Pentium, Pentium, MMX , AMD K5, K6 and Cyrix 6x86MX processors upto 233MHz
USB interface, PCI slot, and PC/104 connector for flexible expansion capabilities
Watchdog timer with jumperless selection

Datasheet

ADVANTECH-PCM-5862-datasheet.pdf

1349 KiB

Download

Extracted Text

® PCM-5862E Pentium -based SBC with Audio, Ethernet,and VGA/LCD ® PCM-5862E/5862EL Pentium -based SBC with Audio, VGA/LCD, and Ethernet Startup Manual Packing List Packing List Packing List Packing List Packing List Specifications Specifications Specifications Specifications Specifications Before you begin installing your card, please make Standard SBC Functions sure that the following materials have been shipped: CPU: • 1 PCM-5862E/5862EL all-in-one single board ® ® Intel Pentium MMX up to 233 MHz computer AMD K6, K6-2 up to 300 MHz 1 startup manual Cyrix 6 x 86 MX-PR166, PR200, PR233 IDT Winchip C6 up to 200 MHz 1 CD-ROM or disk for utlity drivers, and manual (in PDF format)BIOS: AWARD 256 KB Flash BIOS, supports Plug&Play, APM If any of these items are missing or damaged, contact your distributor or sales representative immediately.Chipset: SiS 5571 Green function: APM 1.1 compliant Note: For detailed contents of the PCM-5862E/5862EL, please refer to the2nd level cache: On-board 512 KB Pipeline Burst enclosed CD-ROM or disk (in PDF format). SRAM RAM: Two 72-pin SIMM sockets accept 8 ~ 128 MB EDO/FPM DRAM Enhanced IDE interface: Supports two EIDE devices FDD interface: Supports up to two FDDs (360 K / 1.2 M / 720 K / 1.44 MB / 2.88 MB) Parallel port: One parallel port, supports SPP/EPP/ECP parallel mode Serial ports: Four serial RS-232 ports; three RS-232 (COM1, 3, 4) and one RS-232/422/485 (COM2). All ports with 16C550 compatible UARTs Watchdog timer: 63-level interval from 1 ~ 63 seconds. Generates system reset or IRQ15. Jumperless selection and software enabled/disabled Keyboard/mouse connector: 8-pin header connector for keyboard and PS/2 mouse USB interface: Two USB connectors with fuse protection. Compliant with USB Spec. Rev. 1.0 PC/104 expansion: 104-pin 16-bit PC/104 module connector • I/O bus expansion: One 32-bit PCI bus expansion slot Switch voltage regulator: Supports a full range of For more information on this and other Advantech processor voltage requirements. A good solution for products please visit our website at: processor overheating http://www.advantech.com http://www.advantech.com/epc PCI SVGA/Flat Panel Interface For technical support and service for please visit our support website at:Chipset: C&T 65550 http://support.advantech.comDisplay memory: 1 MB on-board memory, supports up to 2 MB This manual is for the PCM-5862E/5862EL. Display type: Simultaneously supports CRT and flat Part No. 2006586203 1st edition panel (EL, LCD, and gas plasma) displays Printed in Taiwan July 1999 PCM-5862E/5862EL Startup Manual 1 CRT display mode: Supports non-interlaced CRT Connectors and LCD monitors up to 1024 x 768 @ 256 colors Label Function with 1 MB VGA memory or 1024 x 768 @ 64 K CN1 CRT display connector colors with 2 MB (PCM-5862E) CN2 Flat panel display connector CN3 PC/104 ISA-bus expansion Audio Function (PCM-5862E only) CN4 USB channel 1 connector CN5 USB channel 2 connectorChipset: ESS 1868 or 1869 CN6 Fan power connector Audio controller: 16-bit codec, Sound Blaster Pro CN7 Front panel connector compatible CN8 CD audio input connector Stereo sound: 8-bit full-duplex, 16-bit half-duplex CN9 PC/104 ISA-bus expansion integrated 3D audio CN10 Peripheral power connector CN11 Ethernet 100/10Base-T connector Audio interface: Microphone in, Line in, CD audio CN12 IR connector in, Line out, Speaker L, Speaker R CN13 Audio connector Power: Accepts +12 V source for improved audio CN14 Main power connector quality CN15 Keyboard and PS/2 mouse connector CN16 COM-port connector Ethernet Interface CN17 IDE hard drive connector CN18 Floppy drive connector Chipset: REALTEK RTL8139A Ethernet controller CN19 Parallel port connector Ethernet interface: IEEE 802.3U compatible CON1 ATX feature connector 100/10Base-T interface. Includes software drivers CON2 ATX soft power connector switch and boot ROM Jumper Settings Mechanical and Environmental Max. power requirements: JP1: CPU voltage setting 7 A @ 5 V (4.75 V ~ 5.25 V) V 1-2 3-4 5-6 7-8 CC (CORE) Operating temperature: 0 ~ 60° C (32 ~ 140° F) NONE open open open open 2.10 V closed open open open Size (L x W): 203 mm x 146 mm (8" x 5.75") 2.20 V open closed open open Weight: 0.32 kg (0.7 lbs) (w/o package) 2.30 V closed closed open open 2.40 V open open closed open 2.50 V closed open closed open Jumpers and Connectors Jumpers and Connectors Jumpers and Connectors Jumpers and Connectors Jumpers and Connectors 2.60 V open closed closed open 2.70 V closed closed closed open The PCM-5862E/5862EL has a number of jumpers that 2.80 V open open open closed allow you to configure your system to suit your 2.90 V closed open open closed application. The table below lists the function of each 3.00 V open closed open closed of the board's jumpers. 3.10 V closed closed open closed 3.20 V open open closed closed Jumpers 3.30 V closed open closed closed 3.40 V open closed closed closed Label Function 3.50 V closed closed closed closed JP1 CPU voltage setting ® JP2 Pentium MMX enable/disable ® J1 System/PCI clock setting JP2: Pentium MMX (P55C) enable/disable J2 System/PCI clock setting P55C enabled *P55C disabled J4 CPU frequency ratio setting 1 3 1 3 J5 M1 cache linear mode setting J6 CMOS clear J7 Buzzer enable/disable 2 4 2 4 J10 LCD power setting J11 COM4 RI pin setting J12 COM3 RI pin setting J13 Watchdog timer action J14 COM2 RS-232/422/485 setting J15 COM2 RS-232/422/485 setting J16 Audio power source setting J17 ATX power enable/disable 2 PCM-5862E/5862EL Startup Manual 11 10 12 11 10 12 11 10 12 1 3 5 1 3 5 J1 & J2: System/PCI clock setting J12: COM3 RI pin setting System 50MHz 50MHz 60MHz *66MHz 75MHz +5 V +12 V *RI PCI 25MHz 33.3MHz 30MHz *33.3MHz 32MHz 13 5 135 13 5 1 3 5 1 3 5 1 3 5 1 3 5 1 3 5 J1 2 46 2 46 2 46 2 4 6 2 46 24 6 24 6 24 6 13 5 135 13 5 135 135 J2 J13: Watchdog timer action *System reset IRQ15 24 6 24 6 24 6 24 6 24 6 1 1 J4: CPU frequency ratio 1.5/3.5 *2 2.5 3 4 135 13 5 13 5 13 5 1 3 5 J4 J14 & J15: COM2 RS-232/422/485 setting 24 6 24 6 24 6 2 46 26 4 *RS-232 RS-422 RS-485 4.5 5 (reserved) 5.5 (reserved) 135 135 135 15 3 13 5 13 5 J4 J14 2 46 24 6 24 6 24 6 24 6 24 6 J5: M1 cache linear mode enable/disable J15 Enabled *Disabled 31 2 31 2 31 2 J6: CMOS clear *3 V battery on Clear CMOS J16: Audio power source setting *+5 V +12 V 1 1 1 1 J17: ATX power enable/disable J7: Buzzer enable/disable Enabled *Disabled Enabled *Disabled * default J10: LCD power setting *5 V 3.3 V 24 6 24 6 J11: COM4 RI pin setting +5 V +12 V *RI 13 5 135 13 5 24 6 24 6 24 6 PCM-5862E/5862EL Startup Manual 3 Locating Jumpers Mechanical Drawing Mechanical Drawing Mechanical Drawing Mechanical Drawing Mechanical Drawing J13 J5 J14 J15 J16 J12 J11 J10 J9 J17 J4 JP1 J2 J1 J7 JP2 J6 J8 Locating Connectors CN15 CN18 CN17 CN19 CN14 CN13 CN12 CN16 CN9 CN11 CN10 CN7 CN8 CN4 CON1 CN5 CON2 CN2 CN1 CN6 CN3 4 PCM-5862E/5862EL Startup Manual

Frequently asked questions

We specialize in procuring industrial parts at GID Industrial, the company behind Advantech Boards. We are able to find rare and obsolete equipment that our customers need so they can get back to business. We know you have many options when it comes to making your purchase, and we appreciate the opportunity to show your our commitment to quality.

For most parts, a warrranty will be offered, but it depends on what we negotiate with our suppliers. There are some situations where a part is sold without a warranty. Since we specialize in single board computers, they usually receive a one-year warranty.

We are able to ship parts via the major carriers (FedEx, UPS, DHL, USPS). We usually ship on our own accounts, but if you would like to provide us with your own, we can do that, as well. We are not limited to those, however, and can use other carriers at your request.

We are happy to serve customers all over the world. We do a lot of business with customers outside the USA, and we regularly ship to buyers across the globe as a result.

The credit cards Advantech Boards accepts include Visa, MasterCard, Discover, and American Express. You can also pay with a wire transfer or PayPal. If you're in the USA, you can send a check. We may, upon approval, be able to offer terms for larger orders.

What they say about us

FANTASTIC RESOURCE

One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!

Bucher Emhart Glass

EXCELLENT SERVICE

With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.

Fuji

HARD TO FIND A BETTER PROVIDER

Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.

Applied Materials

CONSISTENTLY DELIVERS QUALITY SOLUTIONS

Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.

Nidec Vamco

TERRIFIC RESOURCE

This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.

Trican Well Service

GO TO SOURCE

When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.

ConAgra Foods

Why buy from GID?

What they say about us

Related Products