® Intel Core™2 Duo Processor 3.5" SBC, PCM-9382 VGA, LVDS, GbE, USB, SATA, SSD SMBus SATA Features Audio USB USB ® ƒ Embedded Intel Core™ 2 Duo /Core™ Duo processor LV/ ULV HDD & ƒ Supports 48-bit LVDS/ VGA display Power LED ƒ Supports GbE and HD audio ƒ Supports five USB 2.0 ports and one SATA II ƒ Supports embedded software API and utility Power GPIO Software APIs: GPIO H/W Watchdog Backlight SMBus CPU Speed System Monitor On/Off Throttling COM2 GbE Inverter LVDS USB Utilities: COM1 KB/MS VGA FAN BIOS flash Monitoring Specifications Intel Core 2 Duo/Core Duo/Core Solo FSB667 MHz socket 478 type, up to Intel Core 2 Duo T 7400 CPU Intel Celeron M 1.06 GHz (423) Onboard CPU Front Side Bus 533/667 MHz Processor System Frequency Depends on processor System Chipset Intel 945GME + ICH7M BIOS Award 4 Mb Flash ROM BIOS Technology DDRII 533/667 MHz SO-DIMM Memory Max. Capacity 2 GB Socket 1 x 200-pin SODIMM Chipset Intel 945GME VRAM DVMT 4.0 supports up to 224 MB Graphics Engine Mobile Intel GMA 950 3D/2D engine Display LVDS 1 x LVDS (single channel 24-bit or dual channel 48-bit LVDS) VGA VGA: up to 2048 x 1536 @ 32bpp (85 Hz) Dual Display VGA + LVDS Speed 10/100 Mbps (Supports Wake on LAN) Intel 82551QM 10/100 Mbps Ethernet Ethernet Controller Intel 82541PI 10/100/1000 Mbps GbE (Optional) Connector RJ-45 on Ethernet Audio Chipset Realtek ALC888, High Definition Audio (HD), Line-in, Line out, Mic-in WatchDog Timer Output System reset, Programmable counter from 1 ~ 255 minutes/ seconds CompactFlash 1 Storage SATA 1 x SATA (Max. Data Transfer Rate 150 MB/s) Serial 1 (COM1 supports RS-232) (ESD protection for RS-232: Air gap ±15kV, Contact ±8kV) Ethernet 1 (10/100 Mbps) Rear I/O KB/Mouse 1 VGA 1 USB 1 USB 4 x USB 2.0 1 x COM (ESD protection for RS-232: Air gap ±15kV, Contact ±8kV) Serial COM2 supports RS-232/422/485 (Supports RS-485 auto flow control) Internal I/O SMBUS Supported PS/2 KB/Mouse 1 GPIO 8-bit GPIO Expansion MIO 160 1 Power Type AT/ATX Power Supply Voltage 5V + 5% (12V option for LCD, MIO I/O & CPU FAN) Power Consumption (Typical) Typical: 4.64 A @ 5 V, 0.09 A @ 12 V (Core Duo 2.16 G/DDRII 533/512 MB) Power Power Consumption MAX: 5.14 A @ 5 V, 0.15 A @ 12 V (Core Duo 2.16 G/DDRII 533/512 MB) (Max, test in HCT) Power Management APM1.2, ACPI2.0, wake on LAN, and modem ring-in functions Battery Lithium 3 V / 210 Mah Operational 0 ~ 60° C (32 ~ 140° F) (Operating humidity: 40° C @ 85% RH non-condensing) Environment Non-Operational -40° C ~ 85° C and 60° C @ 95% RH non-condensing Dimensions (L x W) 146 x 102 mm (5.7" x 4") Weight 0.85 kg (1.87 lb), weight of total package Physical Characteristics 30.9mm for PCM-9382F-S0A1E Total Height 44.1mm for PCM-9382F-00A1E, PCM-9382FG 3.5" Single Board Computers All product specifications are subject to change without notice Last updated : 9-May-2011 PCM-9382 Board Diagram Board Diagram Core 2 Duo/Core Duo/Intel Core Solo/ Celeron M (478 uFCPGA/479 uFCBGA) FSB 533/667 SDVO SDVOB SDVO to LVDS transmitter Analog RGB VGA 24 x 2 bit LVDS Intel 945GME 533/667 LVDS DDR 2 SODIMM x 1 PCIe x4 PCI BUS Power 12V, 5V, 5Vsb Audio HD CODEC SATA SATA Intel 82551QM (10/100 Ethernet) IDE Intel 82541PI Power S3, S5 Intel ICH7M CompactFlash (GbE) SMBus USB 2.0 8-bit GPIO GPIO IC USB 2.0 x 4 USB 2.0 x 1 Reset SMBUS LPC Bus LPC Bus FWH COM1/COM2 LPC Super I/O Watchdog (SCH3114) PS/2 KB/MS Ordering Information Power Thermal Operating Part No. CPU VGA LVDS Ethernet SATA USB RS-232 RS-232/422/485 CF MIO Supply Solution Temp. PCM-9382F-00A1E Socket 1 1 1 FE 1 5 1 1 1 1 5 V/12 V Active 0 ~ 60° C 5 V or 5 V/ PCM-9382F-S0A1E 1.06 GHz 1 1 1 FE 1 5 1 1 1 1 Passive 0 ~ 60° C 12 V PCM-9382FG-00A1E Socket 1 1 1 GbE 1 5 1 1 1 1 5 V/12 V Active 0 ~ 60° C Packing List Optional Accessories Part No. Description Quantity Part No. Description PCM-9382 SBC MIO-6250-00A1E MIO2.0 module w/ 3 10/100 Fast Ethernet (RTL8139) Startup Manual MIO-6260-00A1E MIO2.0 IO module w/2 COM, 4 USB Utility CD MIO-6260L-00A1E MIO2.0 IO module w/2 COM, 4 USB, 1 10/100 Ethernet 1700006291 SATA cable 30cm 2 1700016161 AT Power cable, 2 x 6P to 3 x 4P 10 cm 1700060202 KB/MS cable 20cm 1 1701140201 RS-232/422/485 cable 20cm 1 1700016141 AT power cable, 2 x 6P to 2 x 10P 10 cm 1703100152 Audio cable 20cm 1 1700006292 USB cable (2 ports) 17cm 1 1750001940 Cooler (Socket type CPU using) 1 Embedded OS 1703150102 SATA Power cable 10cm 1 1700000265 ATX power cable 10cm 1 Embedded OS Part No. Description 9689000002 mini Jumper pack 1 XPE FP2007 P4&PM-B (from 945) V3.0 Win XPE 2070001575 CPU+945GME cooler 101.6 x 79 x 31.8 cm, ENG 1750001940 1 12 V,PCM-9382F-00A1E, PCM-9382FG-00A1E only Linux Ubuntu V8.10 CPU+945GME heatsink 101.6 x 79 x 20.1 mm for 1960011977T100 1 PCM-9382F-S0A1E only 1960009814 ICH7M heatsink for PCM-9382, 30.6 x 30.6 x 9.8 mm 1 Rear I/O view Online Download www.advantech.com/products MIO160 IO expansion Value-Added Software Services Software API: An interface that defines the ways by which an application program may request services from libraries and/or operating systems. Provides not only the underlying drivers required but also a rich set of user-friendly, intelligent and integrated interfaces, which speeds development, enhances security and offers add-on value for Advantech platforms. It plays the role of catalyst between developer and solution, and makes Advantech embedded platforms easier and simpler to adopt and operate with customer applications. Software APIs Control Monitor General Purpose Input/Output is a flexible parallel interface A watchdog timer (WDT) is a device that performs a specific that allows a variety of custom connections. It allows users operation after a certain period of time if something goes wrong to monitor the level of signal input or set the output status to and the system does not recover on its own. switch on/off a device. Our API also provides Programmable A watchdog timer can be programmed to perform a warm boot GPIO, which allows developers to dynamically set the GPIO (restarting the system) after a certain number of seconds. GPIO Watchdog input or output status. ® SMBus is the System Management Bus defined by Intel Corporation in 1995. It is used in personal computers and servers for low-speed system management communications. The Hardware Monitor (HWM) API is a system health The SMBus API allows a developer to interface a embedded supervision API that inspects certain condition indexes, such as system environment and transfer serial messages using the fan speed, temperature and voltage. Hardware SMBus protocols, allowing multiple simultaneous device SMBus Monitor control. 2 I C is a bi-directional two wire bus that was developed by Philips for use in their televisions in the 1980s. The Hardware Control API allows developers to set the PWM 2 The I C API allows a developer to interface with an embedded (Pulse Width Modulation) value to adjust fan speed or other 2 system environment and transfer serial messages using the I C devices; it can also be used to adjust the LCD brightness. Hardware 2 protocols, allowing multiple simultaneous device control. I C Control Display Power Saving Make use of Intel SpeedStep technology to reduce power power The Brightness Control API allows a developer to interface with consumption. The system will automatically adjust the CPU an embedded device to easily control brightness. Speed depending on system loading. Brightness CPU Speed Control Refers to a series of methods for reducing power consumption in The Backlight API allows a developer to control the backlight computers by lowering the clock frequency. These APIs allow the (screen) on/off in an embedded device. user to lower the clock from 87.5% to 12.5%. System Backlight Throttling Software Utilities The BIOS Flash utility allows customers to update the flash The eSOS is a small OS stored in BIOS ROM. It will boot up in ROM BIOS version, or use it to back up current BIOS by case of a main OS crash. It will diagnose the hardware status, copying it from the flash chip to a file on customers’ disk. The and then send an e-mail to a designated administrator. The BIOS Flash utility also provides a command line version and eSOS also provides remote connection: Telnet server and FTP API for fast implementation into customized applications. server, allowing the administrator to rescue the system. BIOS Flash eSOS The embedded application is the most important property of Flash Lock is a mechanism that binds the board and CF card a system integrator. It contains valuable intellectual property, (SQFlash) together. The user can “Lock” SQFlash via the Flash design knowledge and innovation, but it is easily copied! The Lock function and “Unlock” it via BIOS while booting. A locked Embedded Security ID utility provides reliable security functions SQFlash cannot be read by any card reader or boot from other for customers to secure their application data within embedded platforms without a BIOS with the “Unlock” feature. Embedded Flash Lock BIOS. Security ID The Monitoring utility allows the customer to monitor system health, including voltage, CPU and system temperature and fan speed. These items are important to a device; if critical errors happen and are not solved immediately, permanent damage may be caused. Monitoring All product specifications are subject to change without notice Last updated : 9-May-2011