® ® Intel Celeron M Processor ULV 3.5" SBC, PCM-9388 VGA, LCD, Ethernet, USB, PC/104 Audio 18-bit TTL Features 2x 24-bit LVDS 5VSB ® ® ƒ Supports Intel Celeron M processor ƒ Supports 18-bit TTL/36-bit LVDS (48-bit LVDS optional)/ VGA Dual independent display by VGA + LVDS/VGA + TTL GPIO Power input ƒ Low profile heatsink support with total height under 18mm ƒ Fanless support with low profile heatsink SATA PC/104 ƒ Full LCD support for 18-bit TTL/2-chanel LVDS supports up to 48-bit CF (Optional) ƒ Supports embedded software APIs and utilities USB2.0 COM2 Software APIs: LPT Shared with FDD GPIO H/W Watchdog Backlight SMBus CPU Speed System Monitor On/Off Throttling Utilities: RS232 Ethernet Reset button BIOS flash Monitoring HDD/Power LED KB/MS VGA ® VxWorks Specifications CPU Intel Celeron M 600 MHz and 1.0 GHz on board type Front Side Bus 400 MHz Frequency 600 MHz and 1.0 GHz Processor System L2 Cache 512 KB on 600 MHz, 0L2 on 1.0 GHz System Chipset Intel 852GM + ICH4 BIOS Award 4 Mb Flash ROM BIOS Technology DDR266 MHz SO-DIMM supports Memory Max. Capacity 1 GB Socket 1 x 200-pin SODIMM Chipset Intel 852 GM VRAM Supports 64 MB frame buffer shared system memory Graphics Engine Mobile Intel 852 GM integrated 3D/2D engine Display LVDS 1 x LVDS (single channel 18/24-bit or dual channel 36/48-bit LVDS) VGA VGA: up to 1600 x 1200 @ 32 bpp (85 Hz) TTL LCD 1 x 18-bit TTL Dual Display VGA + TTL, VGA + LVDS Speed 10/100 Mbps (Supports Wake on LAN) Ethernet Controller Realtek RTL 8100CL Connector RJ-45 on Ethernet Audio Chipset Realtek ALC203 AC97, Line-in, Line-out, Mic-in WatchDog Timer Output System reset, Programmable counter from 1 ~ 255 minutes/ seconds CompactFlash 1 SATA SATA (Max. Data Transfer Rate 150 MB/s) (only for PCM-9388S) Storage IDE 1 (only for PCM-9388F) Floppy 1 (Shared with LPT) Serial 1 (COM1 supports RS-232) (ESD protection for RS-232: Air gap ±15kV, Contact ±8kV) Ethernet 1 (10/100 Mbps) Rear I/O PS/2 KB/Mouse 1 VGA 1 Reset Button 1 USB 2 x USB 2.0 1 x COM (ESD protection for RS-232: Air gap ±15kV, Contact ±8kV) Serial COM2 supports RS-232/422/485 IDE 1 UDMA 33 (only for PCM-9388F) Internal I/O Parallel(LPT) 1 (Shared with FDD) FDD 1 (Shared with LPT) SMBUS Supported GPIO 8-bit GPIO IrDA 115 kbps Expansion PC/104 Slot PC/104 Expansion(8/16-Bit ISA) Power Type AT/ATX Power Supply Voltage 5V + 5% (12V option for LCD) Power Consumption (Typical) Typical: 1.56 A @ 5 V, 0.16 A @ 12 V (Celeron M 600/DDR 256 MB) Power Power Consumption MAX: 2.11 A @ 5 V, 0.17 A @ 12 V (Celeron M 600/DDR 256 MB) (Max, test in HCT) Power Management APM, ACPI S1, S5 Battery 3 V / 210 Mah Operational 0 ~ 60° C (32 ~ 140° F) (Operating humidity: 40° C @ 95% RH non-condensing) Environment Non-Operational -40° C ~ 85° C and 60° C @ 95% RH non-condensing Dimensions (L x W) 146 x 102 mm (5.7" x 4") Physical Characteristics Weight 0.85 kg (1.87 lb), weight of total package Total Height 26.3mm 3.5" Single Board Computers All product specifications are subject to change without notice Last updated : 9-May-2011 PCM-9388 Intel Celeron M Board Diagram Board Diagram 400MHz PSB 18 bit TTL Analog RGB TTL Transmitter VGA 2 x 18bit LVDS Intel 852GM DDR200/DDR266 DDR SDRAM 36/48-bit LVDS 200-pin SODIMM x 1 ALC203 Audio AC97 CODEC PCI BUS PCI to ISA PCM-9388SF-S0A1E only PC/104 bridge SATA IDE to SATA 10/100 Intel ICH4 (RTL 8100CL) Secondary IDE USB 2.0 USB 2.0 x 4 CompactFlash LPC Bus FWH 8-bit GPIO COM1/COM2 IrDA LPC Super I/O LPT (W83627HF) Watchdog PS/2 KB&MS Ordering Information 10/100 IDE/ RS-232/ Thermal Operating Part No. CPU Memory VGA LVDS TTL USB RS-232 LPT CF PC/104 Ethernet SATA 442/485 Solution Temp. Celeron M 600 MHz PCM-9388F-M0A1E DDR SODIMM 1 1 1 1 1 IDE 2 1 1 1 1 1 Passive 0 ~ 60° C (512 KB) PCM-9388F-S0A1E Celeron M 1 GHz (0 KB) DDR SODIMM 1 1 1 1 1 IDE 2 1 1 1 1 1 Passive 0 ~ 60° C PCM-9388SF-S0A1E Celeron M 1 GHz (0 KB) DDR SODIMM 1 1 1 1 1 SATA 2 1 1 1 1 1 Passive 0 ~ 60° C PCM-9388Z-512S0A1E Celeron M 1 GHz (0 KB) 512 MB bundle 1 1 1 1 1 SATA 2 1 1 1 1 1 Passive -20 ~ 80° C Packing List Optional Accessories Part No. Description Quantity Part No. Description PCM-9388 SBC 1703200201 ATX power cable Startup Manual 1700001531 LTP to FDD cable Utility CD 1701440504 IDE cable (44p/44p/40p) 50cm (PCM-9388F series only) 1 1700060202 KB/MS cable 20cm 1 Embedded OS 1701140201 RS-232/422/485 cable 20cm 1 1700260250 Parallel Port cable 25cm 1 Embedded OS Part No. Description 1703100152 Audio cable 20cm 1 CE 6.0 Pro Intel (852/855/915/945) 1703100121 USB cable (2 ports) w/ bracket 12cm 1 WinCE 2070007811 2 COM V1.2 ENG 1700008894 SATA data cable 30cm (PCM-9388SF,PCM-9388Z only) 1 SATA power cable 10cm (PCM-9388SF,PCM-9388Z Win XPE 2070007789 XPE WES2009 Intel-Mulitprocess V4.0 ENG 1703150102 1 only) QNX V6.4.1 9689000002 mini Jumper pack 1 Vxwork V5.5 heatsink for PCM-9388F-M0A1E and PCM-9388F- 1961001530T100 1 Linux Ubuntu V10.04 S0A1E, 87 x 85 x 6.24 cm Rear I/O view Online Download www.advantech.com/products Value-Added Software Services Software API: An interface that defines the ways by which an application program may request services from libraries and/or operating systems. Provides not only the underlying drivers required but also a rich set of user-friendly, intelligent and integrated interfaces, which speeds development, enhances security and offers add-on value for Advantech platforms. It plays the role of catalyst between developer and solution, and makes Advantech embedded platforms easier and simpler to adopt and operate with customer applications. Software APIs Control Monitor General Purpose Input/Output is a flexible parallel interface A watchdog timer (WDT) is a device that performs a specific that allows a variety of custom connections. It allows users operation after a certain period of time if something goes wrong to monitor the level of signal input or set the output status to and the system does not recover on its own. switch on/off a device. Our API also provides Programmable A watchdog timer can be programmed to perform a warm boot GPIO, which allows developers to dynamically set the GPIO (restarting the system) after a certain number of seconds. GPIO Watchdog input or output status. ® SMBus is the System Management Bus defined by Intel Corporation in 1995. It is used in personal computers and servers for low-speed system management communications. The Hardware Monitor (HWM) API is a system health The SMBus API allows a developer to interface a embedded supervision API that inspects certain condition indexes, such as system environment and transfer serial messages using the fan speed, temperature and voltage. Hardware SMBus protocols, allowing multiple simultaneous device SMBus Monitor control. 2 I C is a bi-directional two wire bus that was developed by Philips for use in their televisions in the 1980s. The Hardware Control API allows developers to set the PWM 2 The I C API allows a developer to interface with an embedded (Pulse Width Modulation) value to adjust fan speed or other 2 system environment and transfer serial messages using the I C devices; it can also be used to adjust the LCD brightness. Hardware 2 protocols, allowing multiple simultaneous device control. I C Control Display Power Saving Make use of Intel SpeedStep technology to reduce power power The Brightness Control API allows a developer to interface with consumption. The system will automatically adjust the CPU an embedded device to easily control brightness. Speed depending on system loading. Brightness CPU Speed Control Refers to a series of methods for reducing power consumption in The Backlight API allows a developer to control the backlight computers by lowering the clock frequency. These APIs allow the (screen) on/off in an embedded device. user to lower the clock from 87.5% to 12.5%. System Backlight Throttling Software Utilities The BIOS Flash utility allows customers to update the flash The eSOS is a small OS stored in BIOS ROM. It will boot up in ROM BIOS version, or use it to back up current BIOS by case of a main OS crash. It will diagnose the hardware status, copying it from the flash chip to a file on customers’ disk. The and then send an e-mail to a designated administrator. The BIOS Flash utility also provides a command line version and eSOS also provides remote connection: Telnet server and FTP API for fast implementation into customized applications. server, allowing the administrator to rescue the system. BIOS Flash eSOS The embedded application is the most important property of Flash Lock is a mechanism that binds the board and CF card a system integrator. It contains valuable intellectual property, (SQFlash) together. The user can “Lock” SQFlash via the Flash design knowledge and innovation, but it is easily copied! The Lock function and “Unlock” it via BIOS while booting. A locked Embedded Security ID utility provides reliable security functions SQFlash cannot be read by any card reader or boot from other for customers to secure their application data within embedded platforms without a BIOS with the “Unlock” feature. Embedded Flash Lock BIOS. Security ID The Monitoring utility allows the customer to monitor system health, including voltage, CPU and system temperature and fan speed. These items are important to a device; if critical errors happen and are not solved immediately, permanent damage may be caused. Monitoring All product specifications are subject to change without notice Last updated : 9-May-2011