PCM-9580F-00A2 - ADVANTECH - Advantech Boards

Description

Socket 478 Intel Pentium 4 SBC withGbE LAN, USB 2.0, VGA/LVDS and 4 COMGbE1 GbE2 GbE3 UL60601, Socket 478 SBC with 100BASE-T LAN, VGA, LVDS, USB 2.0

Part Number

PCM-9580F-00A2

Price

Request Quote

Manufacturer

ADVANTECH

Lead Time

Request Quote

Category

Single Board Computers

Specifications

System Chipset

Intel 845GV

Form Factor

ATX

Ethernet Chipset

Intel 82551ER

Video Chipset

Intel 845GV

(PCM-9580F) Intel® 82540EM (PCM-9580FG)

System

(With 1 GB DDR DRAM,

System

0.85 kg (weight of total package)

System

1 x Mouse, 3 x RS232, 1 x RS-232/422/485, 1 x LPT

System

10/100/1000 Mbps (PCM-9580FG)

System

128/256/512/1024 MB DDR200/266/333 DRAM

System

Audio

ICH4 support AC’97 2.0 compliant, Optional PCM-231A support Line-in, Line-out, MIC CD Audio in, Line out, Speaker out

Battery

Lithium 3 V/196 mAH

BIOS

AWARD 512 kbit Flash BIOS

Board Type

5.25 in

Cache Memory

Depend on CPU type from 256 to 512 KB

Chipset

Intel 845GV (845GV GMCH+ 82801 ICH4) 400/533 MHz FSB
Intel 845GV + Chrontel CH7017

compatible (PCM-9580FG)

System

Controller

Intel 82551ER [Intel 82551QM optional]

CPU

Socket 478 for Intel Celeron/Pentium 4 (up to Pentium 3.06 GHz)

Dimensions

203 x 146 mm (8" x 5.75")

Display Interface

N/A

Expansion Interface

1 PCI 2.2 with 32-bit/33 MHz slot

Gross Weight

4-bit Input/4-bit Output

I/O Chipset

2 x EIDE (Ultra DMA100), 1 x FDD, 1 x K/B,

Input

1 x RJ45 by cable

IR Interface

N/A

LCD Interface

2-Channel (48-bit) LVDS interface

Memory

8 MB up to 64 MB frame buffer using system memory

Operating Humidity

0% ~ 90% Relative Humidity, noncondensing

Operating Temperature

0 ~ 60° C (32 ~ 140° F) for Pentium 4 up to 3.06 GHz

Power Consumption

Typical : +12 V_CPU @ 1.95 A, +5 V @ 0.37 A, +3.3 V

Power Management

APM1.2, ACPI Support

Power Supply

+5 V ±5%, +12 V ± 5%, +3.3 V ± 5%

Processor

Intel Pentium 4

Resolutions

CRT Mode: Max. 1600 x 1200 x 32 bpp at 85 Hz

Speed

10/100 Mbps (PCM-9580F),

SSD

CompactFlash® card Type I/II

System Memory

Two 184-pin DIMM sockets, support Non-ECC

System Monitor

IEEE 802.3u 100BASE-T Fast Ethernet compatible

TV-out

Supports both NTSC/PAL, S-video or Composite

Type I Flash memory, shared with USB port 3 and port 4

System

USB

4 x USB 1.1/2.0 host ports, support for embedded USB

Video, optional by cable

Display

Watchdog Timer

255 level timer intervals by second or minute

Features

400/533 MHz FSB
Optional Audio Interface
Socket 478 up to 3.06 GHz Intel® Pentium® 4 (0 ~ 60° C)
Supports 2-channel 48-bit LVDS interface
Supports Embedded USB, 4 USB 2.0 ports
Supports Gigabit Ethernet (PCM-9580FG)

Datasheet

ADVANTECH-PCM-9580-datasheet.pdf

115 KiB

Download

Extracted Text

Socket 478 Intel® Pentium® 4 SBC PCM-9580 w/Gigabit LAN, USB 2.0, VGA/LVDS and 4 COM Features USB 1,2 Audio TV-out ATX power connector Ethernet USB 3,4 4COM LVDS  Socket 478 up to 3.06 GHz Intel® Pentium® 4 (0 ~ 60° C)  400/533 MHz FSB CRT Display  Supports Gigabit Ethernet (PCM-9580FG) ATX 12 V power connector  Supports Embedded USB, 4 USB 2.0 ports  Supports 2-channel 48-bit LVDS interface CF on solder Socket 478 up to 3.06 GHz  Optional Audio Interface LTP Pentium® 4 FDD 2nd IDE 1st IDE UDMA/100 GPIO 2 x DIMM up to 2 KB/Mouse Display Speciﬁcations  Chipset Intel 845GV + Chrontel CH7017  Memory Size 8 MB up to 64 MB frame buffer using system memory General  Resolution CRT Mode:  CPU Socket 478 for Intel Celeron/Pentium 4 (up to Pentium Max. 1600 x 1200 x 32 bpp at 85 Hz 3.06 GHz)  LCD Interface 2-Channel (48-bit) LVDS interface  2nd Cache Memory Depend on CPU type from 256 to 512 KB  TV-Out (Optional) Supports both NTSC/PAL, S-video or Composite  System Chipset Intel 845GV (845GV GMCH+ 82801 ICH4) Video, optional by cable 400/533 MHz FSB  Dual Independent N/A  BIOS AWARD 512 kbit Flash BIOS Display  System Memory Two 184-pin DIMM sockets, support Non-ECC Double Data Rate (DDR)128 MB to 2 GB, accepts Mechanical and Environmental 128/256/512/1000 MB DDR200/266/333 DRAM  Dimension (L x W) 203 x 146 mm (8" x 5.75")  Power Management APM1.2, ACPI Support  Weight 0.85 kg (weight of total package)  SSD CompactFlash® card Type I/II  Operating Temperature 0 ~ 60° C (32 ~ 140° F) for Pentium 4 up to 3.06 GHz  WatchDog Timer 255 level timer intervals by second or minute  Operating Humidity 0% ~ 90% Relative Humidity, noncondensing  Expansion Interface 1 PCI 2.2 with 32-bit/33 MHz slot  Battery Lithium 3 V/196 mAH Power  Power Supply Voltage +5 V ± 5%, +12 V ± 5%, +3.3 V ± 5% I/O  Power Consumption Typical : +12 V_CPU @ 1.95 A, +5 V @ 0.37 A, +3.3 V  I/O Interface 2 x EIDE (Ultra DMA100), 1 x FDD, 1 x K/B, @ 3.2 A, +12 V @ 0.1 A 1 x Mouse, 3 x RS232, 1 x RS-232/422/485, 1 x LPT Max: +12 V_CPU @ 6.15 A, +5 V @ 0.41 A,  USB 4 USB 1.1/2.0 host port +3.3 V @ 3.46 A, +12 V @ 0 A. (In HCT) 4 USB 2.0 host ports, support embedded USB Type I +12 V_CPU @ 5.62 A, +5 V @ 0.41 A, Flash memory, shared with USB port 3 and port 4 +3.3 V @ 4.28 A, +12 V @ 0.11 A (QAPlus)  Audio ICH4 support AC’97 2.0 compliant, Optional (With 1 GB DDR DRAM, Pentium 4 3.06 GHz) PCM-231A support Line-in, Line-out, MIC CD Audio in, Line out, Speaker out  IrDA N/A  GPIO 4-bit Input/4-bit Output Ethernet  Chipset Intel 82551ER [Intel 82551QM optional] (PCM-9580F) Intel® 82540EM (PCM-9580FG)  Speed 10/100 Mbps (PCM-9580F), 10/100/1000 Mbps (PCM-9580FG)  Interface RJ45 by cable  Standard IEEE 802.3u 100BASE-T Fast Ethernet compatible (PCM-9580F) IEEE 802.3z/ab 1000 BASE-T Gigabit Ethernet compatible (PCM-9580FG) Single Board Computers PCM-9580 Board Diagram VRM 9.0 Pentium 4 LVDS 2 Channel Socket 478 Clock Gen. Up to 65 MHz QXGA AGTL+ 100/133MHz BUS System Bus 100/133/166MHz System DDR SDRAM TV Out CHRONTEL Memory Intel 82845GE Up to 2GB DVO x 2 165MHZ S-Video CH7017 GMCH 184P x 2 Analog CRT Hub 66MHZ Link USB 2.0 4 ports AC97 Interface Intel 82801DB 2 EIDE Channel UltraATA/100 ICH4 Compack Flash Secondary LPC PCI BUS 33MHZ AD24 PINT#A PREQ#0 COM1/COM2 Super I/O Super I/O 10/100/1000M LAN PRN Firmware W83627HF W83627HF Intel Hub FLOPPY (II) (I) 82562EX/82551ER IRDA 82540EM COM3/COM4 PS/2 KB/MS RJ-45 HardWare Monltoring GPIO Watch-Dog Packing List Ordering Information  1 x PCM-9580 SBC Standard  1 x Mini Jumper Pack [conts.: 10 pcs] (p/n: 9689000002)  PCM-9580F-00A2 Socket 478 SBC W/ 100BASE-T LAN, VGA, LVDS,  1 x Startup Manual USB 2.0  1 x Utility CD  PCM-9580FG-00A2 Same as PCM-9580F-00A2, but with Gigabit Ethernet Optional Accessories  PCM-10586-6000 Wiring Kit for PCM-9580F  PCM-10586-6G00 Wiring Kit for PCM-9580FG (Gigabit LAN)  PCM-231A-00A1 Audio out module  1703100121 USB cable 12 cm for MBPC-300 chassis  1700180170 USB cable 17 cm 2CH  1759214200 Pentium 4 CPU cooler with fan for 1 u Online Download www.advantech.com/products PCI SLOT

Frequently asked questions

We specialize in procuring industrial parts at GID Industrial, the company behind Advantech Boards. We are able to find rare and obsolete equipment that our customers need so they can get back to business. We know you have many options when it comes to making your purchase, and we appreciate the opportunity to show your our commitment to quality.

For most parts, a warrranty will be offered, but it depends on what we negotiate with our suppliers. There are some situations where a part is sold without a warranty. Since we specialize in single board computers, they usually receive a one-year warranty.

We are able to ship parts via the major carriers (FedEx, UPS, DHL, USPS). We usually ship on our own accounts, but if you would like to provide us with your own, we can do that, as well. We are not limited to those, however, and can use other carriers at your request.

We are happy to serve customers all over the world. We do a lot of business with customers outside the USA, and we regularly ship to buyers across the globe as a result.

The credit cards Advantech Boards accepts include Visa, MasterCard, Discover, and American Express. You can also pay with a wire transfer or PayPal. If you're in the USA, you can send a check. We may, upon approval, be able to offer terms for larger orders.

What they say about us

FANTASTIC RESOURCE

One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!

Bucher Emhart Glass

EXCELLENT SERVICE

With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.

Fuji

HARD TO FIND A BETTER PROVIDER

Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.

Applied Materials

CONSISTENTLY DELIVERS QUALITY SOLUTIONS

Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.

Nidec Vamco

TERRIFIC RESOURCE

This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.

Trican Well Service

GO TO SOURCE

When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.

ConAgra Foods

Why buy from GID?

What they say about us

Related Products