PCM-9581F-S4A1 - ADVANTECH - Advantech Boards

Description

on-board Intel Pentium M SBC with Audio, VGA/LCD, PentiumM 1.4 GHz CPU, CRT, LVDS, TV out, Audio, 6 USB2.0, CF, Operation Temp. 0 ~ 60� C

Part Number

PCM-9581F-S4A1

Price

Request Quote

Manufacturer

ADVANTECH

Lead Time

Request Quote

Category

Single Board Computers

Specifications

System Chipset

Intel 855GME

Form Factor

PC/104

Audio

ALC650 AC97 3D surround stereo sound Supports Speaker out, CD-input, Line-in, Line-out, Microphone

Battery

Lithium 3 V/196 mAH

BIOS

AWARD® 512 kbit Flash BIOS

Cache Memory

Depends on CPU type from 512 KB to 2 MB

Chipset

Intel 855GME chip integrated. (Extreme Graphics 2)
Intel 855GME GMCH/ICH4 Chipset

Controller

Intel 82551ER, optional 82551QM, 82540 (Gigabit)

CPU

Embedded Intel Pentium M (Banias/Dothan)/Celeron M Celeron M Processor supported Celeron M 600 MHz (512 KB) PCM-9581F-M0A1E LV Pentium M 1.4 GHz PCM-9581F-S4A1E Pentium M 1.8 GHz PCM-9581F-S8A1E Pentium M 1.1 GHz PCM-9581F-S0A1E, PCM-9581FG-S0A1E uFC

Dimensions

203 x 146 mm (8" x 5.75") 0.85 kg (weight of total package)

Display Interface

CRT + LVDS

Expansion Interface

Supports a PCI2.2 with 32-bit/33 MHz slot and Mini PCI interface

Gross Weight

8-bit general purpose input/output

I/O Chipset

2 x EIDE (UDMA 100), 1 x FDD (optional), 1 x K/B, 1 x Mouse, 3 x RS232, 1 x RS232/422/485, 1 x LPT

Input

RJ45 by cable

IR Interface

SIR115 kbps, IrDA 1.1 Compliant

LCD Controller

Hirose connector supports up to 2 channel (36-bit) LVDS LCD Panel

LCD Interface

2 Channel (2 x 18 -bit) LVDS

Memory

Optimized Shared Memory Architecture, supports up to 64 MB/8 MB frame buffer using system memory

Operating Humidity

0% ~ 90% relative humidity, non-condensing

Operating Temperature

0 ~ 60° C (32 ~ 140° F)

Power Consumption

(Pentium M 1.6 G, 256 M DDR 300) Max: +5 V @ 3.8 A, +12 V @ 0.4 A Average: +5 V @ 3.22 A, +12 V 0.2 A

Power Management

APM 1.2, ACPI Support

Power Supply

+5 V ± 5%, +12 V ± 5%

Processor

-20 ~ 70° C (accessories Storage temperature: -20 ~ 60° C)
Intel Pentium M

Programming

95% @ 60° C

Resolutions

CRT Display mode: pixel resolution up to 1600 x 1200 at 85-Hz and 2048 x 1536 at 75-Hz LCD Display mode: Dual channel LVDS panel support up to UXGA panel resolution with frequency range from 25 MHz to 112 MHz

Speed

10/100 Mbps (PCM-9581F), 10/100/1000 Mbps (PCM-9581FG)

SSD

Supports CompactFlash Card TYPE I/II (shared 2nd IDE Channel)

System Memory

2 x 184-pin DIMM sockets, support ECC Double Data Rate (DDR)128 MB to 2 GB, accepts 128/256/512/1024 MB DR200/266/333 DRAM

System Monitor

IEEE 802.3u 100Base-T and IEEE 802.3z/ab 1000Base-T compatible Built-in boot ROM in Flash BIOS

TV-out

Supports both NTSC/PAL, S-video and Composite Video

USB

6 x USB 2.0 compliant ports

Watchdog Timer

255-level interval timer, from 15 sec to 14835 sec, setup by software, jumperless selection, generates system reset

Features

Embedded Intel® Pentium® M 1.1 GHz/Intel Celeron® M 600 MHz
Extended temperature optional
Support ECC DDR Memory
Supports enhanced Intel Speedstep® Technology
Supports six USB 2.0 ports
Supports up to 1000Base-T Ethernet
Supports up to two channel 48-bit LVDS interface
With Vcore 2 phase design for more stable system design

Datasheet

ADVANTECH-PCM-9581-datasheet.pdf

120 KiB

Download

Extracted Text

Onboard Intel® Pentium® M SBC PCM-9581 with Audio, VGA/LCD Features PCI 2 x DIMM  Embedded Intel® Pentium® M 1.1 GHz/Intel Celeron® M 600 MHz  Support ECC DDR Memory Ethernet  With Vcore 2 phase design for more stable system design  Supports up to 1000Base-T Ethernet 2nd IDE Socket 478  Supports six USB 2.0 ports support Pentium M LPT @ 400MHz FSB  Supports up to two channel 48-bit LVDS interface 1st IDE  Supports enhanced Intel Speedstep® Technology GPIO  Extended temperature optional 6 USB ATX power connector TV-out 48-bit KB/Mouse Audio 4 COM LVDS CRT  Standard IEEE 802.3u 100Base-T and IEEE 802.3z/ab Speciﬁcations 1000Base-T compatible Built-in boot ROM in Flash BIOS General Display  CPU Embedded Intel Pentium M (Banias/Dothan)/Celeron M Celeron M Processor supported  Chipset Intel 855GME chip integrated. (Extreme Graphics 2) Celeron M 600 MHz (512 KB) PCM-9581F-M0A1E  Memory Size Optimized Shared Memory Architecture, supports up to LV Pentium M 1.4 GHz PCM-9581F-S4A1E 64 MB/8 MB frame buffer using system memory Pentium M 1.8 GHz PCM-9581F-S8A1E  Resolution CRT Display mode: pixel resolution up to 1600 x 1200 Pentium M 1.1 GHz PCM-9581F-S0A1E, at 85-Hz and 2048 x 1536 at 75-Hz PCM-9581FG-S0A1E LCD Display mode: Dual channel LVDS panel support uFCPGA2 (478 pin) PCM-9581F-00A1E up to UXGA panel resolution with frequency range from PCM-9581FG-00A1E 25 MHz to 112 MHz  2nd Cache Memory Depends on CPU type from 512 KB to 2 MB  LCD Interface 2 Channel (2 x 18 -bit) LVDS  System Chipset Intel 855GME GMCH/ICH4 Chipset  LVDS Hirose connector supports up to 2 channel (36-bit)  BIOS AWARD® 512 kbit Flash BIOS LVDS LCD Panel  System Memory 2 x 184-pin DIMM sockets, support ECC Double  TV-Out (Cable optional) Supports both NTSC/PAL, S-video and Composite Data Rate (DDR)128 MB to 2 GB, accepts Video 128/256/512/1024 MB DR200/266/333 DRAM  Dual Independent CRT + LVDS  Power Management APM 1.2, ACPI Support Display  SSD Supports CompactFlash Card TYPE I/II (shared 2nd IDE Channel) Mechanical and Environmental  Watchdog Timer 255-level interval timer, from 15 sec to 14835 sec,  Dimension (L x W) 203 x 146 mm (8" x 5.75") setup by software, jumperless selection, generates  Weight 0.85 kg (weight of total package) system reset  Operating Temperature 0 ~ 60° C (32 ~ 140° F)  Expansion Interface Supports a PCI2.2 with 32-bit/33 MHz slot and Mini  Operating Humidity 0% ~ 90% relative humidity, non-condensing PCI interface  Storage Temperature -20 ~ 70° C (accessories Storage temperature:  Battery Lithium 3 V/196 mAH -20 ~ 60° C)  Storage Humidity 95% @ 60° C I/O  I/O Interface 2 x EIDE (UDMA 100), 1 x FDD (optional), 1 x K/B, Power 1 x Mouse, 3 x RS232, 1 x RS232/422/485, 1 x LPT  Power Supply Voltage +5 V ± 5%, +12 V ± 5%  USB 6 x USB 2.0 compliant ports  Power Consumption (Pentium M 1.6 G, 256 M DDR 300)  Audio ALC650 AC97 3D surround stereo sound Max: +5 V @ 3.8 A, +12 V @ 0.4 A Supports Speaker out, CD-input, Line-in, Line-out, Average: +5 V @ 3.22 A, +12 V 0.2 A Microphone  IrDA SIR115 kbps, IrDA 1.1 Compliant Packing List  GPIO 8-bit general purpose input/output  1 x PCM-9581 SBC Ethernet  1 x Mini Jumper Pack (p/n:9689000002)  Chipset Intel 82551ER, optional 82551QM, 82540 (Gigabit)  1 x Startup Manual  Speed 10/100 Mbps (PCM-9581F),  1 x Utility CD 10/100/1000 Mbps (PCM-9581FG)  1 x ATX Power Cable (p/n:1700000265)  Interface RJ45 by cable Stackable SBCs All product specifications are subject to change without notice Last updated : 7-Feb-2007 PCM-9581 Board Diagram Intel PentiumM processor VGAConnector DDR LVDS Connector 855GME DIMM DVIConnector Codec TVConnector FDD MiniPCI Connector LPT Super LAN LAN I/O COM 6USB2.0 chip Connector 1/2 Audio KB/ ICH4 codec Mouse IDE COM Super 3/4 I/O CF PCISlot Ordering Information L2 Giga RS-232/ LPT/FDD/ PCI Mini Thermal Operation Part No. CPU CRT LVDS TV out 10/100 Audio USB2.0 RS-232 CF Cache LAN 422/485 KB/MS Slot PCI Solution Temp. PCM-9581F-00A1E Socket 479 - Yes 36-bit Yes 1 -- Yes 6 3 1 Yes Yes 1 1 Active 0 ~ 60° C PCM-9581FG-00A1E Socket 479 - Yes 36-bit Yes -- 1 Yes 6 3 1 Yes Yes 1 1 Active 0 ~ 60° C Celeron M PCM-9581F-M0A1E 512 KB Yes 36-bit Yes 1 -- Yes 6 3 1 Yes Yes 1 1 Passive 0 ~ 60° C 600 MHz Celeron M PCM-9581Z-M0A1E 512 KB Yes 36-bit Yes 1 -- Yes 6 3 1 Yes Yes 1 1 Passive -20 ~ 80° C 600 MHz LV Pentium PCM-9581F-S0A1E 1 MB Yes 36-bit Yes 1 -- Yes 6 3 1 Yes Yes 1 1 Passive 0 ~ 60° C M 1.1 GHz Celeron M PCM-9581F-S1A1E 512 KB Yes 36-bit Yes 1 -- Yes 6 3 1 Yes Yes 1 1 Passive 0 ~ 60° C 1GHz LV PentiumM PCM-9581F-S4A1E 2MB Yes 36-bit Yes 1 -- Yes 6 3 1 Yes Yes 1 1 Passive 0 ~ 60° C 1.4 GHz PentiumM PCM-9581F-S8A1E 2MB Yes 36-bit Yes 1 -- Yes 6 3 1 Yes Yes 1 1 Active 0 ~ 60° C 1.8 GHz  MIO-3110-00A1E Mini PCI to USB interface connection hub Optional Accessories  MIO-3120-00A1E Mini PCI interface to Wireless 802.11 b/g  PCM-10586-6100E Wiring kit for PCM-9581F/9586 communication module  PCM-10586-6A00E Wiring kit for PCM-9581FG  MIO-3121-00A1E Mini PCI to 4 COM Module  CF-HDD-ADP CompactFlash 50 pin to IDE 44-pin adapter  MIO-3140-00A1E Mini PCI interface to SATA storage module  1703050306 TV-out cable  MIO-3150-00A1E Mini PCI interface to video capture module  1703100260 USB cable (26 cm)  1703100121 USB cable (12 cm)  PCM-110-00A3E 1-slot PCI riser card for 5.25" biscuits  PCM-120-00A3E 2-slot PCI riser card for 5.25" biscuits Online Download www.advantech.com/products LPC PCIBus

Frequently asked questions

We specialize in procuring industrial parts at GID Industrial, the company behind Advantech Boards. We are able to find rare and obsolete equipment that our customers need so they can get back to business. We know you have many options when it comes to making your purchase, and we appreciate the opportunity to show your our commitment to quality.

For most parts, a warrranty will be offered, but it depends on what we negotiate with our suppliers. There are some situations where a part is sold without a warranty. Since we specialize in single board computers, they usually receive a one-year warranty.

We are able to ship parts via the major carriers (FedEx, UPS, DHL, USPS). We usually ship on our own accounts, but if you would like to provide us with your own, we can do that, as well. We are not limited to those, however, and can use other carriers at your request.

We are happy to serve customers all over the world. We do a lot of business with customers outside the USA, and we regularly ship to buyers across the globe as a result.

The credit cards Advantech Boards accepts include Visa, MasterCard, Discover, and American Express. You can also pay with a wire transfer or PayPal. If you're in the USA, you can send a check. We may, upon approval, be able to offer terms for larger orders.

What they say about us

FANTASTIC RESOURCE

One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!

Bucher Emhart Glass

EXCELLENT SERVICE

With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.

Fuji

HARD TO FIND A BETTER PROVIDER

Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.

Applied Materials

CONSISTENTLY DELIVERS QUALITY SOLUTIONS

Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.

Nidec Vamco

TERRIFIC RESOURCE

This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.

Trican Well Service

GO TO SOURCE

When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.

ConAgra Foods

Why buy from GID?

What they say about us

Related Products