PCM-9581FG-S0A1E - ADVANTECH - Advantech Boards

Description

on-board Intel Pentium M SBC with Audio, VGA/LCD

Part Number

PCM-9581FG-S0A1E

Price

Request Quote

Manufacturer

ADVANTECH

Lead Time

Request Quote

Category

Single Board Computers

Specifications

System Chipset

Intel 855GME

Form Factor

ATX

Ethernet Chipset

Intel 82551ER

Video Chipset

Intel 855GME

Audio

ALC650 AC97 3D surround stereo sound Supports Speaker out, CD-input, Line-in, Line-out, Microphone

Battery

Lithium 3 V/196 mAH

BIOS

AWARD® 512 kbit Flash BIOS

Cache Memory

Depends on CPU type from 512 KB to 2 MB

Chipset

Intel 855GME chip integrated. (Extreme Graphics 2)
Intel 855GME GMCH/ICH4 Chipset

Controller

Intel 82551ER, optional 82551QM, 82540 (Gigabit)

CPU

Embedded Intel Pentium M (Banias/Dothan)/Celeron M Celeron M Processor supported Celeron M 600 MHz (512 KB) PCM-9581F-M0A1E LV Pentium M 1.4 GHz PCM-9581F-S4A1E Pentium M 1.8 GHz PCM-9581F-S8A1E Pentium M 1.1 GHz PCM-9581F-S0A1E, PCM-9581FG-S0A1E uFC

Dimensions

203 x 146 mm (8" x 5.75") 0.85 kg (weight of total package)

Display Interface

CRT + LVDS

Expansion Interface

Supports a PCI2.2 with 32-bit/33 MHz slot and Mini PCI interface

Gross Weight

8-bit general purpose input/output

I/O Chipset

2 x EIDE (UDMA 100), 1 x FDD (optional), 1 x K/B, 1 x Mouse, 3 x RS232, 1 x RS232/422/485, 1 x LPT

Input

RJ45 by cable

IR Interface

SIR115 kbps, IrDA 1.1 Compliant

LCD Controller

Hirose connector supports up to 2 channel (36-bit) LVDS LCD Panel

LCD Interface

2 Channel (2 x 18 -bit) LVDS

Memory

Optimized Shared Memory Architecture, supports up to 64 MB/8 MB frame buffer using system memory

Operating Humidity

0% ~ 90% relative humidity, non-condensing

Operating Temperature

0 ~ 60° C (32 ~ 140° F)

Power Consumption

(Pentium M 1.6 G, 256 M DDR 300) Max: +5 V @ 3.8 A, +12 V @ 0.4 A Average: +5 V @ 3.22 A, +12 V 0.2 A

Power Management

APM 1.2, ACPI Support

Power Supply

+5 V ± 5%, +12 V ± 5%

Processor

-20 ~ 70° C (accessories Storage temperature: -20 ~ 60° C)
Intel Pentium M

Programming

95% @ 60° C

Resolutions

CRT Display mode: pixel resolution up to 1600 x 1200 at 85-Hz and 2048 x 1536 at 75-Hz LCD Display mode: Dual channel LVDS panel support up to UXGA panel resolution with frequency range from 25 MHz to 112 MHz

Speed

10/100 Mbps (PCM-9581F), 10/100/1000 Mbps (PCM-9581FG)

SSD

Supports CompactFlash Card TYPE I/II (shared 2nd IDE Channel)

System Memory

2 x 184-pin DIMM sockets, support ECC Double Data Rate (DDR)128 MB to 2 GB, accepts 128/256/512/1024 MB DR200/266/333 DRAM

System Monitor

IEEE 802.3u 100Base-T and IEEE 802.3z/ab 1000Base-T compatible Built-in boot ROM in Flash BIOS

TV-out

Supports both NTSC/PAL, S-video and Composite Video

USB

6 x USB 2.0 compliant ports

Watchdog Timer

255-level interval timer, from 15 sec to 14835 sec, setup by software, jumperless selection, generates system reset

Features

Embedded Intel Pentium M 1.1 GHz/Intel Celeron M 600 MHz
Extended temperature optional
Support ECC DDR Memory
Supports enhanced Intel Speedstep Technology
Supports six USB 2.0 ports
Supports up to 1000Base-T Ethernet
Supports up to two channel 48-bit LVDS interface
With Vcore 2 phase design for more stable system design

Datasheet

ADVANTECH-PCM-9581-datasheet.pdf

111 KiB

Download

Extracted Text

Onboard Intel® Pentium® M SBC PCM-9581 with Audio, VGA/LCD Features PCI 2 x DIMM  Embedded Intel® Pentium® M 1.1 GHz, 1.6 GHz (optional)/Intel® Celeron® M 600 MHz  Support ECC DDR Memory Ethernet  With Vcore 2 phase design for more stable system design 2nd IDE  Supports up to 1000Base-T Ethernet Socket 478 support Pentium M  Supports 6 ports Host USB 2.0 LPT @ 400MHz FSB 1st IDE  Supports up to 2 channel 48-bit LVDS interface GPIO  Supports Enhanced Intel Speedstep® Technology 6 USB ATX power connector TV-out 48-bit KB/Mouse Audio 4 COM LVDS CRT Ethernet Speciﬁcations  Chipset Intel 82551ER, optional 82551QM, 82541GI (Gigabit)  Speed 10/100 Mbps (PCM-9581F), General 10/100/1000 Mbps (PCM-9581FG)  CPU Embedded Intel Pentium M (Banias/Dothan)/Celeron M  Interface RJ45 by cable Celeron M Processor supported  Standard IEEE 802.3u 100Base-T and IEEE 802.3z/ab Celeron M 600 MHz (512 KB) PCM-9581F-M0A1 1000Base-T compatible Pentium M 1.1 GHz PCM-9581F-S0A1, PCM-9581FG-S0A1 Built-in boot ROM in Flash BIOS uFCPGA2 (478 pin) PCM-9581F-00A1 Display PCM-9581FG-00A1 Optional:  Chipset Intel 855GME chip integrated. (Extreme Graphics 2) Penitum M 745 1.8 GHz @ 400 MHz FSB  Memory Size Optimized Shared Memory Architecture, supports up to Pentium M 1.6 GHz @ 400 MHz FSB 64 MB/8 MB frame buffer using system memory  2nd Cache Memory Depends on CPU type from 512 KB to 2 MB  Resolution CRT Display mode: pixel resolution up to 1600 x 1200  System Chipset Intel 855GME GMCH/ICH4 Chipset at 85-Hz and 2048 x 1536 at 75-Hz  BIOS AWARD 512 kbit Flash BIOS LCD Display mode: Dual channel LVDS panel support  System Memory 2 x 184 pin DIMM sockets, support ECC Double up to UXGA panel resolution with frequency range from Data Rate (DDR)128 MB to 2 GB, accepts 25 MHz to 112 MHz 128/256/512/1000 MB DR200/266/333 DRAM  LCD Interface 2 Channel (2 x 24 -bit) LVDS  Power Management APM 1.2, ACPI Support  LVDS Hirose connector supports up to 2 channel (48-bit)  SSD Supports CompactFlash Card TYPE I/II (shared 2nd LVDS LCD Panel IDE Channel)  TV-Out (Cable optional) Supports both NTSC/PAL, S-video and Composite  WatchDog Timer 255-level timer interval, from 15 sec to 14835 sec, Video setup by software, jumperless selection, generates  Dual Independent CRT + LVDS system reset Display  Expansion Interface Supports a PCI2.2 with 32-bit/33 MHz slot and Mini PCI interface Mechanical and Environmental  Battery Lithium 3 V/196 mAH  Dimension (L x W) 203 mm x 146 mm (8" x 5.75")  Weight 0.85 kg (weight of total package) I/O  Operating Temperature 0 ~ 60° C (32~ 140° F)  I/O Interface 2 x EIDE (UDMA 100), 1 x FDD (optional), 1 x K/B,  Operating Humidity 0% ~ 90% relative humidity, non-condensing 1 x Mouse, 3 x RS232, 1 x RS232/422/485,1 x LPT  USB 6 USB 2.0 compliant ports Power  Audio ICH4 chip. AC97 3D surround stereo sound  Power Supply Voltage +5 V ± 5%, +12 V ± 5% Supports Speaker out, CD-input, Line -in, Line-out,  Power Consumption (Pentium M 1.6 G, 256 M DDR 300) Microphone Max: +5 V @ 3.8 A, +12 V @ 0.4 A  IrDA SIR115 kbps, IrDA 1.1 Compliant Average: +5 V @ 3.22 A, +12 V 0.2 A  GPIO 8-bit general purpose input/output Single Board Computers PCM-9581 Board Diagram Packing List Ordering information  1 x PCM-9581 SBC Standard  1 x Mini Jumper Pack (p/n:9689000002)  PCM-9581F-00A1 uFCPGA2 478 855GME/Audio/VGA/LCD/CFC  1 x Startup Manual  PCM-9581F-S0A1 Same as PCM-9581F-00A1 with on board Pentium M  1 x Utility CD 1.1 GHz  1 x ATX Power Cable (p/n:1700000265)  PCM-9581FG-00A1 Same as PCM-9581F-00A1, but with Gigabit Ethernet  PCM-9581FG-S0A1 Same as PCM-9581FG-S0A1, but with Gigabit Ethernet  PCM-9581F-M0A1 Same as PCM-9581F-00A1 w/ Celeron M 600 (512 K) Optional Accessories  PCM-10586-6100 Wiring kit for PCM-9581F/9586  PCM-10586-6A00 Wiring kit for PCM-9581FG  CF-HDD-ADP CompactFlash 50 pin to IDE 44-pin adapter  1703050306 TV-out cable  1703100260 USB cable (26 cm)  1703100121 USB cable (12 cm) Online Download www.advantech.com/products

Frequently asked questions

We specialize in procuring industrial parts at GID Industrial, the company behind Advantech Boards. We are able to find rare and obsolete equipment that our customers need so they can get back to business. We know you have many options when it comes to making your purchase, and we appreciate the opportunity to show your our commitment to quality.

For most parts, a warrranty will be offered, but it depends on what we negotiate with our suppliers. There are some situations where a part is sold without a warranty. Since we specialize in single board computers, they usually receive a one-year warranty.

We are able to ship parts via the major carriers (FedEx, UPS, DHL, USPS). We usually ship on our own accounts, but if you would like to provide us with your own, we can do that, as well. We are not limited to those, however, and can use other carriers at your request.

We are happy to serve customers all over the world. We do a lot of business with customers outside the USA, and we regularly ship to buyers across the globe as a result.

The credit cards Advantech Boards accepts include Visa, MasterCard, Discover, and American Express. You can also pay with a wire transfer or PayPal. If you're in the USA, you can send a check. We may, upon approval, be able to offer terms for larger orders.

What they say about us

FANTASTIC RESOURCE

One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!

Bucher Emhart Glass

EXCELLENT SERVICE

With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.

Fuji

HARD TO FIND A BETTER PROVIDER

Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.

Applied Materials

CONSISTENTLY DELIVERS QUALITY SOLUTIONS

Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.

Nidec Vamco

TERRIFIC RESOURCE

This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.

Trican Well Service

GO TO SOURCE

When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.

ConAgra Foods

Why buy from GID?

What they say about us

Related Products