® Pentium Processor-based Control POS-562/L Board for Multimedia Applications ATX power On-board 16-bit sound supply input capability ® Supports DiskOnChip (DOC) On-board 100/10Base-T Switching power Ethernet w/ RJ-45 technology for CPU core logic voltage 4 serial ports w/ PCI/ISA expansion bus +5 V/+12 V power capability Supports CPU up to ® Pentium MMX, Cyrix 6x86 MX, and AMD K6 2 parallel ports On-board 512 KB Pipeline Burst Cache 18-bit LVDS interface On-board XGA (36-bit) VGA/ 2 x SIMM, 1 x DIMM, Two USB interfaces with LCD controller (C&T 65555) 2~4 total 128 MB fuse protection MB VDRAM Introduction Features ® The POS-562/L is a powerful Pentium processor-based • All-in-one design simplifies system integration and control board designed for high-end multimedia POS increases system stability applications as well as other special OEM markets. It supports ® • Compatible with Intel Pentium MMX, Cyrix 6x86MX, and ® Intel Pentium MMX, AMD K5 and K6, and Cyrix 6x86 MX AMD K5 and K6 processors up to 233 MHz processors. The POS-562/L is packed with special on-board features like 100/10Base-T Ethernet, 16-bit sound, 36-bit XGA • On-board POS features such as 4 x RS-232 with power and LCD and LVDS support as well as DOC 2000 and an 2 x USB interfaces for controlling cash drawers or other abundance of IOs. external peripherals • 100/10Base-T with RJ-45 connection for the most The POS-562/L uses a standardized layout based on Western demanding networking environment Digital’s LPM/LPX format. It is 100% PC compatible and readily connectable to any existing PC hardware and software. • 16-bit full-duplex 3D audio for quality multimedia sound Special POS features like four on-board serial ports, each with applications (POS-562 only) +5 V/+12 V power output capability, and two USB connections • Special industrial features not found on conventional are available to accommodate a wide array of POS peripherals. motherboards include watchdog timer, SSD and CMOS POS-562’s industrial grade construction allows it to withstand EPROM backup continuous operation in a harsh POS environment where • Standardized layout conforms to Western Digital LPM/LPX reliability is essential. Other on-board industrial features not format for easy installation within standard sized chassis found on conventional motherboards include a watchdog timer • Supports up to 36-bit XGA high resolution LCD, 18-bit for dependability during unmanned operations, and CMOS LVDS, as well as CRT VGA at 2 ~ 4 MB display memory backup to Flash ROM. An on-board SSD socket can support ® DiskOnChip Flash modules. • Advanced CPU switching power technology for stable and low heat CPU voltage power conversion The POS-562/L includes two 72-pin SIMM sockets (maximum ® 128 MB DRAM) and one 168-pin DIMM socket for up to 128 • Supports DiskOnChip Flash modules MB total on-board memory. Note: All features and specifications are subject to change without notice. POS-562/L PCI High Performance CRT/Flat Panel Interface Specifications • Chipset: C&T 65555, 64-bit graphics engine Standard SBC functions • Flat panel performance: 36-bit direct interface to mono, ® ® • Processor: Intel Pentium , Pentium MMX up to 233 MHz STN, DSTN & TFT panels. Advanced power management. 3.3 AMD K5, K6 up to 233MHz volt LCD supported Cyrix 6x86 MX PR-233 • CRT/LCD Resolution: Up to 1280 x 1024 x 16 bpp @ 4 • BIOS: Award 256 KB Flash BIOS includes Ethernet boot MB DRAM ROM and VGA BIOS. Supports Plug and Play • Display Memory: 2 MB on-board standard, 4 MB optional • System chipset: SiS 5582 LVDS (Low Voltage Differential Signal) Interface • Green function: APM 1.1 compliant • Chipset: TI SN75LVDS84 • Second level cache: On-board 512 KB Pipelined Burst • Performance: 18 low-voltage TTL data channels plus clock-in SRAM and 3 low-voltage differential data channels plus clock-out. • RAM: Two 72-pin SIMM sockets and one 168-pin DIMM 3.3 volt and 250 mW (typ.). Meets ANSI EIA/TIA-644 socket for 128 MB total on-board memory. Supports 3.3 V or 5 V SIMM by setting jumpers Ethernet Interface • Chipset: Realtek RTL 8139A • Enhanced IDE interface: Two Enhanced IDE interfaces, one 44-pin header for 2.5" HDD and one 40-pin header supports • Ethernet interface: PCI 100/10 Mbps Ethernet controller. 3.5" HDD & CD-ROM Novell NE2000 compatible. Includes software drivers and boot ROM (RJ-45 connection) • FDD interface: Supports up to two FDDs (360 KB/ 1.2 MB/720 KB/1.44 MB/2.88 MB) Solid State Disk • Parallel port: Two parallel ports, supporting SPP/EPP/ECP ® • One 32-pin socket supports DiskOnChip parallel mode • DOS and Windows 3.1 command compatible • Serial port: Four serial ports with +5 V/+12 V power capability Mechanical and Environmental COM 1, 3, 4: RS-232 • Max. power requirements: 7 A @ 5 V (4.75 to 5.25), COM 2: RS-232/422/485 0.15 A @ ±12 V • Watchdog timer: Software enabled/disabled. 0 ~ 63 sec. • Operating temperature: 0 to 60° C (32 to 140° F) selectable • Size: 220 mm (L) x 235 mm (W) (8.7” x 9.25”) • Keyboard connector: Mini-DIN keyboard connector and • Weight: 0.5 kg (1.1 lbs.) internal 6-pin header connector for mouse/keyboard • Mouse connector: PS/2 mouse connector, jumper selectable to keyboard Ordering Information • USB interface: Two USB connectors with fuse protection. q POS-562-00A1 ® Complies with USB Spec. Rev. 1.0 Pentium Processor-based Control Board for POS Applications, with 2 MB display memory. Includes 512 KB • Power inputs: ATX power connection (conforms to ATX cache memory (processor, SSD, DRAM not included) power supply specification), AT power connection • Expansion bus: PISA bus (PCI/ISA). Expand via riser card q POS-562L-00A1 (POS-102) (Same as POS-562-00A1, but without 16-bit sound) Audio Function (POS-562 only) q PCD-2000-0200/0400/0800/1200/2400/4000/7200 • Chipset: ESS 1869 ® DiskOnChip 2 ~ 72 MB Flash Module • Audio Controller: 16-bit, Sound Blaster Pro compatible q POS-102-0000 • Sound Quality: Full-duplex, integrated 3D audio 2 PCI/ISA Share Slots Riser Card (Configuration: 2 PCI, 2 • Audio interface: Mic in, Line in, CD audio in, Line out, ISA, or 1 PCI + 1 ISA) Speaker out q 1700080170 USB cable for POS-560, POS-562, PCM-5862 series 2010056200 MN8b