® Intel Core™2 Quad LGA 775 MicroATX AIMB-567 with Dual VGA/DVI, 4 COM, dual LAN Features ® ƒ Intel G41 chipset supports 800/1066/1333 MHz FSB ƒ Dual channel DDR3 800/1066/1333 MHz SDRAM up to 4 GB ƒ Supports dual display, VGA and DVI-D ƒ Supports dual core and quad core processors with 45nm processing ƒ Supports SATA RAID 0,1,5,10 for G2 version ƒ Supports Embedded Software APIs and Utilities Software APIs: SMBus H/W Monitor GPIO Watchdog Utilities: BIOS flash Monitoring Specifications CPU (45 nm/65 nm) Intel Core 2 Quad Intel Core 2 Duo Intel Pentium Dual-Core Intel Celeron Max. Speed Q9400 2.66 GHz E8500 3.16 GHz E6500 2.6 GHz E1500 2.2 GHz L2 Cache 6 MB 6 MB 6 MB 512 KB Processor System Chipset Intel G41+ICH7(VG), Intel G41+ICH7R(G2) BIOS AMI 16 Mbit, SPI Front Side Bus 800/1066/1333 MHz PCIe x16 (Gen2) 4.0 GB/s per direction, 1 slot PCIe x4 1 GB/s per direction, 1 slot (G2) Expansion Slot PCIe x1 250 MB per direction, 1 slot (VG) PCI 32-bit/33 MHz, 2 slots Technology Dual channel DDR3 800/1066 MHz SDRAM Memory Max. Capacity 4 GB Socket 2 x 240-pin DIMM Embedded Intel GMA X4500 shared 352 MB system memory Graphics DVI Yes (If DVI is used, PCIe x16 is automatically disabled), via Chrontel 7318C Transmitter Dual Display CRT+DVI Interface 10/100/1000 Mbps Ethernet Controller GbE LAN1: Intel 82583V, GbE LAN2: Intel 82583V Connector RJ-45 x 2 Max. Data Transfer Rate 300 MB/s SATA II Channel 4 Mode ATA 100/66/33 EIDE Channel 1 (max. 2 devices) VGA 1 DVI 1 Ethernet 2 Rear I/O USB 4 (USB 2.0) Audio 2 (Mic-in, Line-out) Serial 2 (RS-232) PS/2 2 (1 x keyboard and 1 x mouse) USB 4 (USB 2.0) Serial 2 (1 x RS-232, 1 x RS-232/422/485 to support auto flow control) IDE 1 Internal Connector SATA 4 FDD - Parallel 1 GPIO 8-bit GPIO Output System reset Watchdog Timer Interval Programmable 1 ~ 255 sec/min Power On Intel Core 2 Quad Q9400 2.66 GHz FSB 1333 MHz, 4 GB DDR3 1066 SDRAM Power Requirement 3.3 V 5 V 12 V 5 Vsb -12 V 0.19 A 2.98 A 3.48 A 0.18 A 0.18 A Operating Non-Operating Environment 0 ~ 60° C (32 ~ 140° F), depends on CPU Temperature -40 ~ 85° C (-40 ~ 185° F) speed and cooler solution Physical Characteristics Dimensions (W x D) 244 x 244 mm (9.6" x 9.6") Industrial Motherboards All product specifications are subject to change without notice Last updated : 5-Jul-2011 USB 2.0/1.1 AIMB-567 Intel Core 2 Quad/Core 2 Duo/ Board Diagram Pentium DC LGA775 processor CRT Channel A DDR3 800/1066 Intel G41 GMCH SDVO Channel B DVI-D DDR3 800/1066 PCIe x 1 GbE-LAN1: Intel 82583V ATA 33/66/100 1 ATA 100 Ports PCIe x 1 GbE-LAN2: Intel 82583V 300MB/s 4 SATA2 Ports 1 x PCIe x 1(ICH7) ICH7/7R PCIe x 1 (ICH7) 8 USB Ports PCIe x 4 (ICH7R) 4 x PCIe x 1(ICH7R) Edge Connector Audio Codec Intel HD Audio Realtek ALC892 SPI LPC Bus PCI1~2 BIOS Edge Connector Super IO Fintek Winbond 81216AD W83627DHG-P 1 RS232, 1 RS-232/422/485 2 RS-232, WDT, LPT, PS/2 Ordering Information Packing List SW PCIe PCIe Description Quantity Part Number Chipset Display GbE RAID x4 x1 IDE HDD cable 1 Serial ATA HDD data cable 2 AIMB-567G2-00A1E G41/ICH7R VGA/DVI 2 Yes 1 - Serial ATA HDD power cable 2 AIMB-567VG-00A1E G41/ICH7 VGA 1 No - 1 COM port cable kit 2 *We strongly suggest using only Advantech’s certified LGA775 CPU coolers to ensure I/O port bracket 1 board reliability under harsh conditions. Startup manual 1 Utility CD 1 Riser Card Accessories Part Number Description AIMB-RP3PF-21A1E 2U riser card with 1 PCIe x16 & 2 PCI slot expansion Part Number Description AIMB-RP30P-03A1E 2U riser card for 3 PCI expansion 1750000334 LGA775 CPU cooler (115 W) AIMB-RP10P-01A1E 1U riser card for 1 PCI expansion 1960022033T000 LGA775 CPU cooler for 2U chassis 1700008461 USB cable with four ports, 30.5 cm 1700002204 USB cable with dual ports, 27 cm I/O View 1700003195 USB cable with dual ports, 17.5 cm 1700008809 Printer port cable 1700018699 KBMS cable 1*6P-2.5/DIN-6P(F)*2, 25 cm Embedded OS/API AIMB-567G2-00A1E AIMB-567VG-00A1E OS/API Part No. Description Win XPE 2070010378 XPE WES 2009 AIMB-567 V4.0 JPN Software API SUSI V3.0 Online Download www.advantech.com/products Direct Media IIterface 800/1066/1333 2GB/s bandwidth MHz FSB 32bit/33MHz PCI Bus Value-Added Software Services Software API: An interface that defines the ways by which an application program may request services from libraries and/or operating systems. Provides not only the underlying drivers required but also a rich set of user-friendly, intelligent and integrated interfaces, which speeds development, enhances security and offers add-on value for Advantech platforms. It plays the role of catalyst between developer and solution, and makes Advantech embedded platforms easier and simpler to adopt and operate with customer applications. Software APIs Control Monitor General Purpose Input/Output is a flexible parallel interface A watchdog timer (WDT) is a device that performs a specific that allows a variety of custom connections. It allows users operation after a certain period of time if something goes wrong to monitor the level of signal input or set the output status to and the system does not recover on its own. switch on/off a device. Our API also provides Programmable A watchdog timer can be programmed to perform a warm boot GPIO, which allows developers to dynamically set the GPIO (restarting the system) after a certain number of seconds. GPIO Watchdog input or output status. ® SMBus is the System Management Bus defined by Intel Corporation in 1995. It is used in personal computers and servers for low-speed system management communications. The Hardware Monitor (HWM) API is a system health The SMBus API allows a developer to interface a embedded supervision API that inspects certain condition indexes, such as system environment and transfer serial messages using the fan speed, temperature and voltage. Hardware SMBus protocols, allowing multiple simultaneous device SMBus Monitor control. 2 I C is a bi-directional two wire bus that was developed by Philips for use in their televisions in the 1980s. The Hardware Control API allows developers to set the PWM 2 The I C API allows a developer to interface with an embedded (Pulse Width Modulation) value to adjust fan speed or other 2 system environment and transfer serial messages using the I C devices; it can also be used to adjust the LCD brightness. Hardware 2 protocols, allowing multiple simultaneous device control. I C Control Display Power Saving Make use of Intel SpeedStep technology to reduce power power The Brightness Control API allows a developer to interface with consumption. The system will automatically adjust the CPU an embedded device to easily control brightness. Speed depending on system loading. Brightness CPU Speed Control Refers to a series of methods for reducing power consumption in The Backlight API allows a developer to control the backlight computers by lowering the clock frequency. These APIs allow the (screen) on/off in an embedded device. user to lower the clock from 87.5% to 12.5%. System Backlight Throttling Software Utilities The BIOS Flash utility allows customers to update the flash The eSOS is a small OS stored in BIOS ROM. It will boot up in ROM BIOS version, or use it to back up current BIOS by case of a main OS crash. It will diagnose the hardware status, copying it from the flash chip to a file on customers’ disk. The and then send an e-mail to a designated administrator. The BIOS Flash utility also provides a command line version and eSOS also provides remote connection: Telnet server and FTP API for fast implementation into customized applications. server, allowing the administrator to rescue the system. BIOS Flash eSOS The embedded application is the most important property of Flash Lock is a mechanism that binds the board and CF card a system integrator. It contains valuable intellectual property, (SQFlash) together. The user can “Lock” SQFlash via the Flash design knowledge and innovation, but it is easily copied! The Lock function and “Unlock” it via BIOS while booting. A locked Embedded Security ID utility provides reliable security functions SQFlash cannot be read by any card reader or boot from other for customers to secure their application data within embedded platforms without a BIOS with the “Unlock” feature. Embedded Flash Lock BIOS. Security ID The Monitoring utility allows the customer to monitor system health, including voltage, CPU and system temperature and fan speed. These items are important to a device; if critical errors happen and are not solved immediately, permanent damage may be caused. Monitoring All product specifications are subject to change without notice Last updated : 5-Jul-2011