Advanced Mezzanine Card Freescale AMC-4201 QorIQ P4080 AMC NEW Features ƒ Freescale P4080 8 Cores e500-mc PowerPC, up to 1.5 Ghz ƒ DDR3 up to 1333 MHz 8 GB with ECC support ƒ 4 MB SPI Flash and 2 GB NAND Flash ƒ One 10 GbE SFP+ port for external access ƒ AMC.0, AMC.1, AMC.2, and AMC.4 compliant and configurable SERDES channel (SRIO/XAUI/PCIe) support ƒ Efficient power consumption, typical 32W ƒ 8 KHz and 19.44 MHz Telecom Clock Sync support Introduction ® The AMC-4201 is a single-width, mid-size AMC based on the Freescale P4080 processor. It combines eight Power Architecture e500-mc Cores operating at frequencies up to 1.5 GHz with high-performance, datapath acceleration logic, extensive networking I/O, and peripheral bus interfaces. It combines powerful multi-Core Power Architecture performance ® with network processing capabilities, and builds on the communications ubiquity of Freescale’s QorIQ product family. AMC-4201 provides 4 and 8 GB build options for onboard DDR3 memory at 1333 MHz with ECC support. One front-panel 10GbE SFP+ connector provides network access in addition to a front panel console and debug port. The unique SERDES design supports up to four different AMC port configurations for a mix of SRIO, PCIe, XAUI and SGMII channels. This makes the AMC extremely versatile and caters to a wider range of MicroTCA or ATCA Carrier topologies beyond just telecom applications. 4 MB SPI Flash and 2 GB NAND Flash provide onboard options for software and storage. The AMC also provides 8 KHz and 19.44 MHz telecom clock synchronization support. Main Carrier Board Specifications CPU Freescale QorIQ P4080 8 Cores e500-mc PowerPC, up to 1.5 Ghz Processor system Bootloader U-boot SPI Flash Spansion S25FL032P0XMFI011, 4 MB Boot Device NAND Flash Micron MT29F16G08ABABAWP, 2 GB Technology DDR III with ECC, up to 1333 MHz Memory Max. Capacity 8 GB Controller Netlogic AEL1010 Ethernet Interface One 10 GbE SFP+ port for external access Hardware Monitor Controller IPMI v1.5 compatible MMC Source code Pigeon Point System-based Firmware Update Standard HPM.1 compliant Operation System Compatibility Linux AMC Mid-size, single width AMC.0 compliant and Configurable SERDES channel support: Form Factor - PCIe: AMC.1 compliant with port 4-7,8-11 Interface - Ethernet: AMC.2 compliant with port 8-11. - SRIO: AMC.4 compliant with port 4-7, 8-11 Max 40 W Power Consumption Typical Less than 32 W Physical Dimension 180.6 mm x 73.5 mm Operating Storage Temperature -5 ~ 55° C -40 ~ 70° C Humidity IEC60068-2-78 (95%RH @ 40° C) Environment 2 Vibration IEC60068-2-6 (0.002 G /Hz, 1Grms) Shock IEC60068-2-27 (10 G, 11 ms) Altitude 300 m below sea level to 4,000 m above sea level 10,000 above sea level Regulatory Conformance UL94V0, FCC Class B, CE, RoHS & WEEE Ready Compliance Standards PICMG AMC.0, AMC.1, AMC.2, AMC.4, IPMI v1.5, HPM.1, NEBS Level 3 All product specifications are subject to change without notice Last updated : 10-Feb-2011 AMC-4201 Block Diagram Ordering Information Model number Configuration AMC-4201-0XAE AMC-4201 with P4080-1.5 GHz and 8 GB DDR3-1333 MHz memory AMC-4201-1XAE AMC-4201 with P4080-1.5 GHz and 4 GB DDR3-1333 MHz memory X based on different SerDes configuration The value of X Port Port Area 1 2 3 4 5 P4-7 PCIex4 (Gen2) PCIex4 (Gen2) PCIex4 (Gen2) PCIex4 (Gen2) SRIO (2.5G) Fat pipe P8-11 4x SGMII SRIO (2.5G) PCIex4 (Gen2) XAUI SRIO (2.5G) Online Download www.advantech.com/products