® Advanced Mezzanine Card Intel MIC-5602Rev2 45 nm Core™2 Duo Processor AMC NEW Features ®  Supports Intel 45 nm Core™2 Duo Low Voltage processor ®  Intel 3100 chipset 400/533 MHz FSB  Up to 4 GB DDRII 400 MHz SDRAM with ECC  One Gigabit Ethernet (RJ-45), one USB 2.0 port, and one console port (mini-USB) to front panel  AMC connector routes dual Gigabit Ethernet SerDes (x2), SATA (x2), USB (x2), dual PCIe x4, or single PCIe x8  Boot from network, CompactFlash, SATA, USB or onboard flash disk  Supports IPMI v1.5 and Serial-over-LAN function  AMC.0, AMC.1, AMC.2 and AMC.3 compliant RoHS COMPLIANT 2002/95/EC Introduction ® The MIC-5602Rev2 is a highly integrated single-width, full-size, processor AMC. Its design is based on the low-power, high-performance 45nm Intel Core™2 Duo processors combined with the Intel 3100 chipset. The board includes 2 or 4 GB of soldered DDR2 400 MHz memory with ECC for higher MTBF and optimum cooling. To facilitate development, test and integration while offering typical network connectivity once deployed, the front panel provides a gigabit Ethernet connector, a serial port and a USB 2.0 host port. The board can be configured with two PCI Express x4 ports or a single PCI Express x8 port to the edge connector. Two gigabit Ethernet ports provide AMC.2 compliance and connect to the 3100 chipset via PCI Express for maximum data throughput. Dual SATA interfaces provide AMC.3–compliant storage and two USB ports offer further connectivity opportunities. A dedicated Module Management Controller (MMC) monitors onboard conditions and manages hot swap operation for field upgrades or module replacement without the need to power down the underlying system. While maintaining the functional features of the original MIC-5602, the Rev2 series offers a significant performance increase and memory size upgrade for applications such as dense computing, host media processing and protocol offload. Specifications ® CPU Intel Core™2 Duo SL9380 (1.8 GHz) Chipset Intel 3100 Processor System AMI (1. Dual images with update rollback, 2. CMOS settings can be changed over IPMI, and 3. CMOS backup works BIOS without battery) Front Side Bus 800 MHz Bus PCI Express PCI Express rev1.0a : one x8 and two x4 routed to AMC connector Technology DDRII 400 with ECC Memory Max. Capacity 4 GB Controller Intel 82571EB dual-port Gigabit Ethernet controller (support 802.3d compliant link aggregation) Ethernet Interface One GbE accessible on front panel via RJ-45 and two SerDes links to AMC common options region ports 0 and 1 CompactFlash Optional expansion board with CF type-1 socket Mass Storage Onboard 1GB industrial grade internal flash disk (used as NV storage, emergency boot disk or diagnostics boot media) AMC Edge Connector Two SATA interfaces to common ports region 2-3 SATA Interface Other One SATA routed to CF daughter board Serial Interface I/O Routed to front panel as USB Slave interface through onboard USB to Serial converter I/O One USB 2.0 compliant host port (standard USB Connector) on front panel USB Interface AMC Edge Connector Two USB 2.0 ports connect to rear AMC edge connector Watchdog Timer AMC compliant watchdog Hardware Monitor Controller IPMI v1.5 compatible MMC Source Code Pigeon Point System-based Firmware Update Standard HPM.1 compliant Operating System Compatibility Carrier Grade Linux (Wind River Platform for Network Equipment, Linux Edition 2.0) AMC Single size, single width (full size front panel and full size CPU heatsink available as option) Form Factor Interface AMC.0 compliant Miscellaneous LEDs x1 blue for hot swap, x1 red/amber for failure and OOS, x1 green for general purpose Configuration Core™2 Duo SL9380 + 3100 + 2 GB on-board DDRII SDRAM Power Requirement Consumption estimated 38.5 watts Physical Dimensions 180.6 mm x 73.5 mm All product specifications are subject to change without notice Last updated : 17-Jun-2010 MIC-5602Rev2 Block Diagram 45 nm Intel COM2 IPMB-L MMC Core 2 Duo LV 1GB Flash Disk DDR PLL (option expansion Module) USB1 SATA21 SATA to PATA DDR2 CF Disk DDR-II c Converter DRAM c r LPC AMC Con FWH TPM (optional) Intel 3100 USB2 & USB3 Port 16 SATA 0 & SATA1 Ports 2,3 USB-Serial Mini USB COM1 One PCIe x8 or two PCIe x4 Ports 4..11 Converter IMCH Con. PCIe x4 SERDES USB0 Ports 0,1 USB Con. IICH Dual GbE RJ45 w/ X’mr FrontPanel Clock Generator DC/DC Converter Operating Non-operating Temperature -5 ~ 55° C (23 ~ 122° F) Note 4 -40 ~ 70° C (-40 ~ 140° F) Humidity IEC60068-2-78 (95%RH @ 40° C) Environment 2 Vibration (5 ~ 500 Hz) IEC60068-2-6 ( 0.002G /Hz, 1Grms) Shock IEC60068-2-27 (10G, 11ms) Altitude sea level to 4,000 m above sea level 10,000 above sea level Conformance UL94V0, FCC Class B, CE, RoHS & WEEE Ready Regulatory NEBS Level 3 Designed for GR-63-CORE and GR-1089-CORE Compliance Standards PICMG AMC.0, AMC.1, AMC.2, AMC.3, IPMI v1.5, HPM.1 Ordering Information On-Board Option Model Number CPU Memory MIC-5602A2-M2E Core 2 Duo LV 1.8 GHz (SL9380) 2 GB DDR2 with ECC MIC-5602A2-M4E Core 2 Duo LV 1.8 GHz (SL9380) 4 GB DDR2 with ECC Notes: 1. TPM option is available on request. 2. CF module option is available as standard configuration. 3. MIC-5602A2-M4E builds will depend on the availability of the 4 GB DDR2 SDRAM Figure 1: MIC-5602A2-M2E with Full-Size Front Panel from the manufacturers. Check with your local Advantech sales ahead of time for information. 4. Operating Temperature: depending on the actual air flow through the AMC slot. 5. On-board Lithium battery is available upon request (MOQ required). Online Download www.advantech.com/products FSB