® ® ® 6U CompactPCI Intel Pentium M Processor Board with VGA/Dual Gigabit MIC-3369A LAN/PMC (PICMG 2.16) Features ® ®  Supports Intel Pentium M processor @ 1.6 GHz/1 MB L2 cache  Supports Dual Gigabit LANs  Up to 2 GB (DDR-200) memory on board with ECC ®  Intel E7501 chipset  One 64-bit/66 MHz PMC expansion slot ®  PICMG 2.16 compliant with Packet Switching Backplane Specification  Hot-Swap Specification compliant (PICMG 2.1)  On-board 2.5" HDD connector and CompactFlash socket  Master/Drone mode mode selectable Introduction ® ® The MIC-3369A is a highly integrated and cost effective CompactPCI single-board computer based on the Intel Pentium M processor. It is an ideal application blade for integration ® ® ® into products where high-performance and low-power consumption are key requirements. The MIC-3369A has been optimized for the Intel Pentium M processor and Intel E7501 ® chipset which deliver a compelling 3.2 GB/s bandwidth across a 400 MHz front side bus. The Pentium M incorporates 32 KB of level 1 cache, 1 MB of level 2 advanced transfer cache and up to 3.2 GB/s of bandwidth across dual data rate memory channels. The MIC-3369A supports up to 2 GB of ECC DDR-200 on-board memory. With performance in mind, the MIC-3369A design makes extensive use of Intel’s latest I/O controller hub technology and provides 64-bit data buses throughput. The on-board dual Gigabit Ethernet controller is connected via a 64-bit/133 MHz PCI-X bus for maximum sustained packet throughput. In addition to a full array of industry standard I/O features including on-board 2.5” hard disk drive and two USB ports, the MIC-3369A also provides one 64-bit/66 MHz PMC site for on-board I/O expansion making it ready to meet the most flexible and demanding I/O processing needs. The MIC-3369A can be used in either a system slot or peripheral slot, making it an ideal choice for applications requiring PICMG 2.16 Packet Switched Backplane support for Gigabit speed switched-fabric interconnection between blades. The board is designed in compliance with the PICMG 2.9 specification to cooperate with remote system and platform management modules. With all these features and inherent hot-swap the MIC-3369A is perfectly matched for mission critical telecom and data communication applications where high availability is essential, such as 3G wireless infrastructure, Voice-over-IP, media gateways, softswitches and triple-play server clusters. When used in conjunction with the SCSI Ultra 320 controller on the RIO-3309S Rear Transition Module, RAID 0, 1, 10 capabilities are added to to its extensive list of features. Specifications ® ® CPU (CPU not included) Intel Pentium M processor (Socket 479) Speed 1.6 GHz (both 400 MHz FSB) Processor System L2 Cache 1 MB ® Chipset Intel E7501/ICH4 BIOS Award 4 Mbit Flash (By request : Network booting/Console redirect) Front Side Bus 400 MHz Bus PCI 64-bit/133 MHz (PCI-X support) Technology DDR-200 SDRAM with ECC support Memory Max. Capacity 2 GB Integrated 512 MB/1 GB/2 GB memory on board Controller ATI RageXL Graphic VRAM 8 MB on board Interface 10/100/1000Base-TX ® Ethernet Controller Intel 82546GB (Dual GbE ports) I/O Connector RJ-45 x1 (front) Mode ATA 33/66/100 EIDE Channel 2 Connector One IDE connector and space reserved for embedded 2.5" HDD Interface System/Drone mode capability PCI-to-PCI Bridge Controller Hint HB6 Bus 64-bit/66 MHz PMC 1 VGA 1 Front I/O Interface USB 2 (USB 2.0) Serial (COM1) 1 (RS-232, RJ-45 connector) LAN 1 Operating System Compatibility Windows2000/NT 4. 0/XP, Red Hat Linux 9.0, VxWorks Controller Winbond W83782D Hardware Monitor Monitor CPU temperature, 3.3 V/5 V/12 V MIC-3369A Specifications Cont. Output Interrupt, system reset, NMI Watchdog Timer Interval Programmable, 0 ~ 255 sec. Site 1 PMC Interface 64-bit/66 MHz PCI Mezzanine (IEEE1386.1) Signal +5 V/+3.3 V compliant Solid State Disk CompactFlash socket LEDs HDD, power, hot swap Miscellaneous USB (2.0) 2 channels Real Time Clock Built-in the South Bridge Voltage +3.3 V +5 V +12 V -12 V ® ® Power Requirement (Intel Pentium M 1.6 GHz) Maximum 5.18 A 4.19 A 38 mA <25 mA Operating Non-Operating Temperature 0 ~ 55° C (32 ~ 131° F) -40 ~ 70° C (-40 ~ 158° F) Humidity - 95 % @ 60° C (non-condensing) Environment Shock 20 G 50 G Vibration (5-500 Hz) 1.5 Grms 2.0 Grms Altitude 60 m below sea level to 4000 m above sea level Airflow 300 LFM = 1.54 m/s Dimensions 233.35 x 160 mm (9.2" x 6.3"), 1-slot width Physical Characteristics Weight 0.8 kg (1.76 lb) PICMG 2.0, R3.0 CompactPCI Specification Compliance Standard PICMG 2.1, R2.0 Hot-Swap Specification PICMG 2.16, R1.0 Packet Switching Backplane Specification Recommended Configurations CPU Board PMC Module Rear I/O Board Enclosure RIO-3309C-A, RIO-3309S-A1, MIC-3036-A/S2, MIC-3039-B, MIC-3056A, MIC-3038A/C, MIC-3041A/B/C/CW/L, MIC-3042A/B, MIC-3369A MIC-3665-A, MIC-3665-B RIO-3309S-A2 MIC-3081A/B*, MIC-3082A, CP-150 * MIC-3081A doesn’t support RIO-3309S-Ax Rear Transition Board Rear Panel On-board Header / Socket / Connector Part Number Slot Width KB & Mouse COM2* GbE LAN VGA USB 10/100 LAN** SCSI IDE FDD SCSI COM1 USB PRT Conn. RIO-3309C-A 1 1 2 1 1 1 - 1 1 - 1 1 1 J3/J5 1 J1/J2/ RIO-3309S-A1 1 1 2 1 1 1 - 1 1 1 1 1 1 1 J3/J5 J1/J2/ RIO-3309S-A2 1 1 2 1 1 1 1 1 1 - 1 1 1 1 J3/J5 * Supports RS-232/422/485 selectable ** Optional for 3rd LAN from MIC-3369A but occupies the I/O port for COM2. Ordering Information Front Panel I/O On-board Main Features Part Number CPU Support LAN COM PMC USB VGA CPU Memory EIDE Channel CF Socket Slot Width MIC-3369A-M0 1 MB L2 1 1 1 2 1 -- 512 MB 2.5" HDD 1 1 MIC-3369A-M1 1 MB L2 1 1 1 2 1 -- 1 GB 2.5" HDD 1 1 MIC-3369A-M2 1 MB L2 1 1 1 2 1 -- 2 GB 2.5" HDD 1 1 * The above part numbers do not include the CPU, please order separately. One PMC knockout One DB-15 VGA port Two USB 2.0 ports One RJ-45 COM1 port One RJ-45 Gigabit LAN port One u-FCPGA socket One 64-bit/66 MHz One 2.5" HDD bay One passive CPU heatsink CompactFlash PMC connector socket Memory on board One 2.5" IDE socket Online Download www.advantech.com/products